Low Skew Output Buffer

DESCRIPTION The PLL102-10 is a high performance, low skew, low jitter zero delay buffer designed to distribute high speed clocks and is available in 8-pin SOIC or MSOP package. It has two outputs that are synchronized with the input. The synchronization is established via CLKOUT feed back to the

文件：180.37 Kbytes 页数：6 Pages

PLL

Programmable DDR Zero Delay Clock Driver

DESCRIPTIONS The PLL102-108 is a zero delay buffer that distributes a single-ended clock input to ten pairs of differential clock outputs and one feedback clock output. Output signal duty cycles are adjusted to 50, independent of the duty cycle at CLK_INT. The PLL can be bypassed for test purpose

文件：165.16 Kbytes 页数：10 Pages

PLL

Programmable DDR Zero Delay Clock Driver

DESCRIPTIONS The PLL102-108 is a zero delay buffer that distributes a single-ended clock input to ten pairs of differential clock outputs and one feedback clock output. Output signal duty cycles are adjusted to 50, independent of the duty cycle at CLK_INT. The PLL can be bypassed for test purpose

文件：165.16 Kbytes 页数：10 Pages

PLL

Programmable DDR Zero Delay Clock Driver

DESCRIPTIONS The PLL102-108 is a zero delay buffer that distributes a single-ended clock input to ten pairs of differential clock outputs and one feedback clock output. Output signal duty cycles are adjusted to 50, independent of the duty cycle at CLK_INT. The PLL can be bypassed for test purpose

文件：165.16 Kbytes 页数：10 Pages

PLL

Programmable DDR Zero Delay Clock Driver

DESCRIPTIONS The PLL102-108 is a zero delay buffer that distributes a single-ended clock input to ten pairs of differential clock outputs and one feedback clock output. Output signal duty cycles are adjusted to 50, independent of the duty cycle at CLK_INT. The PLL can be bypassed for test purpose

文件：165.16 Kbytes 页数：10 Pages

PLL

Programmable DDR Zero Delay Clock Driver

DESCRIPTIONS The PLL102-109 is a zero delay buffer that distributes a single-ended clock input to six pairs of differential clock outputs and one feedback clock output. Output signal duty cycles are adjusted to 50, independent of the duty cycle at CLK_INT. The PLL can be bypassed for test purpose

文件：166.6 Kbytes 页数：10 Pages

PLL

Programmable DDR Zero Delay Clock Driver

DESCRIPTIONS The PLL102-109 is a zero delay buffer that distributes a single-ended clock input to six pairs of differential clock outputs and one feedback clock output. Output signal duty cycles are adjusted to 50, independent of the duty cycle at CLK_INT. The PLL can be bypassed for test purpose

文件：166.6 Kbytes 页数：10 Pages

PLL

Programmable DDR Zero Delay Clock Driver

DESCRIPTIONS The PLL102-109 is a zero delay buffer that distributes a single-ended clock input to six pairs of differential clock outputs and one feedback clock output. Output signal duty cycles are adjusted to 50, independent of the duty cycle at CLK_INT. The PLL can be bypassed for test purpose

文件：166.6 Kbytes 页数：10 Pages

PLL

Programmable DDR Zero Delay Clock Driver

DESCRIPTIONS The PLL102-109 is a zero delay buffer that distributes a single-ended clock input to six pairs of differential clock outputs and one feedback clock output. Output signal duty cycles are adjusted to 50, independent of the duty cycle at CLK_INT. The PLL can be bypassed for test purpose

文件：166.6 Kbytes 页数：10 Pages

PLL

Low Skew Output Buffer

DESCRIPTION The PLL102-10 is a high performance, low skew, low jitter zero delay buffer designed to distribute high speed clocks and is available in 8-pin SOIC or MSOP package. It has two outputs that are synchronized with the input. The synchronization is established via CLKOUT feed back to the

文件：180.37 Kbytes 页数：6 Pages

PLL