3.0A SURFACE MOUNT SCHOTTKY BARRIER DIODE

Features ● Schottky Barrier Chip ● Ideally Suited for Automatic Assembly ● Low Power Loss, High Efficiency ● Surge Overload Rating to 2 0A Peak ● For Use in Low Voltage Application ● Guard Ring Die Construction ● Plastic Case Material has UL Flammability Classification Rating 94V-O Mec

文件：138.3 Kbytes 页数：2 Pages

ZSELEC

淄博圣诺

丝印：K32；Package：SOD-123FL；Surface Mount Schottky Barrier Rectifier

Features Metal silicon junction, majority carrier conduction For surface mounted applications Low power loss, high efficiency High forward surge current capability For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications

文件：2.53437 Mbytes 页数：4 Pages

UNSEMI

优恩半导体

3.0A SURFACE MOUNT SCHOTTKY BARRIER DIODE

Features ● Schottky Barrier Chip ● Ideally Suited for Automatic Assembly ● Low Power Loss, High Efficiency ● Surge Overload Rating to 2 0A Peak ● For Use in Low Voltage Application ● Guard Ring Die Construction ● Plastic Case Material has UL Flammability Classification Rating 94V-O Mec

文件：138.3 Kbytes 页数：2 Pages

ZSELEC

淄博圣诺

3.0A SURFACE MOUNT SCHOTTKY BARRIER DIODE

Features e Schottky Barrier Chip © Ideally Suited for Automatic Assembly ® Low Power Loss, High Efficiency e Surge Overload Rating to 2 0A Peak ® For Use in Low Voltage Application ® Guard Ring Die Construction ® Plastic Case Material has UL Flammability Classification Rating

文件：1.21711 Mbytes 页数：3 Pages

TECHPUBLIC

台舟电子

DS3486 Quad RS-422, RS-423 Line Receiver

1FEATURES 2• Four Independent Receivers • TRI-STATE Outputs • Internal Hysteresis −140 mV (typ) • Fast Propagation Times −19 ns (typ) • TTL Compatible Outputs • 5V Supply • Pin Compatible and Interchangeable with MC3486 DESCRIPTION Texas Instruments' quad RS-422, RS-423 receiver featu

文件：326.51 Kbytes 页数：12 Pages

TI

德州仪器

DS34C86T Quad CMOS Differential Line Receiver

1FEATURES 2• CMOS Design for Low Power • ±0.2V Sensitivity Over the Input Common Mode Voltage Range • Typical Propagation Delays: 19 ns • Typical Input Hysteresis: 60 mV • Inputs Won't Load Line when VCC = 0V • Meets the Requirements of EIA Standard RS- 422 • TRI-STATE Outputs for System

文件：397.82 Kbytes 页数：13 Pages

TI

德州仪器

DS34C87T CMOS Quad TRI-STATE Differential Line Driver

1FEATURES 2• TTL Input Compatible • Typical Propagation Delays: 6 ns • Typical Output Skew: 0.5 ns • Outputs Won't Load Line When VCC = 0V • Meets the Requirements of EIA Standard RS- 422 • Operation from Single 5V Supply • TRI-STATE Outputs for Connection to System Buses • Low Quiescent

文件：420.99 Kbytes 页数：14 Pages

TI

德州仪器

DS34LV86T 3V Enhanced CMOS Quad Differential Line Receiver

1FEATURES • Low Power CMOS Design (30 mW Typical) • Interoperable With Existing 5V RS-422 Networks • Industrial Temperature Range • Meets TIA/EIA-422-B (RS-422) and ITU-T V.11 Recommendation • 3.3V Operation • ±7V Common Mode Range @ VID = 3V • ±10V Common Mode Range @ VID = 0.2V • Recei

文件：470.9 Kbytes 页数：16 Pages

TI

德州仪器

DS34LV87T Enhanced CMOS Quad Differential Line Driver

1FEATURES • Meets TIA/EIA-422-B (RS-422) and ITU-T V.11 Recommendation • Interoperable With Existing 5V RS-422 Networks • Ensured VOD of 2V Min Over Operating Conditions • Balanced Output Crossover for Low EMI (Typical Within 40 mV of 50% Voltage Level) • Low Power Design (330 μW @ 3.

文件：383.97 Kbytes 页数：15 Pages

TI

德州仪器

Single/Dual/Quad/Octal TDM-Over-Packet Chip

General Description These IETF PWE3 SAToP/CESoPSN/TDMoIP/HDLC compliant devices allow up to eight E1, T1 or serial streams or one high-speed E3, T3, STS-1 or serial stream to be transported transparently over IP, MPLS or Ethernet networks. Jitter and wander of recovered clocks conform to G.823/

文件：803.77 Kbytes 页数：74 Pages

Maxim

美信