Integrated Circuit Television Tuner Band Selector

Description: The NTE1658 is an integrated circuit in a 9–Lead SIP type package designed for electronically tuning television sets. This IC is used for producing the VHF channel “L” band power supply/VHF channel “H” band power supply/UHF channel power supply for tuner and the CATV power supply a

文件：21.91 Kbytes 页数：2 Pages

NTE

Integrated Circuit Dual AF Preamplifier

Description: The NTE1659 is a monolithic 2–channel preamplifier integrated circuit in a 8–Lead SIP type package suitable for car stereo applications. Features: • Low Noise • Wide Power Supply Voltage Range • Built–In Bias Circuit Reqiuires Fewer External Components • High Open–

文件：21.26 Kbytes 页数：2 Pages

NTE

Single Phase Bridge Rectifier 2.0 Amp

Features: • Ideal for Printed Circuit Board • Surge Overload Rating: 50A (Peak)

文件：18.56 Kbytes 页数：2 Pages

NTE

Integrated Circuit Audio Preamplifier

Features: • High Open−Loop Voltage Gain: 80dB Typ • High Input Impedance: 200kΩ Typ • Low Noise: 0.9µV Typ (Rg = 2.4kΩ, converted into input voltage)

文件：79.12 Kbytes 页数：2 Pages

NTE

Integrated Circuit Synchronization Signal Processor For B/W TV and Small-Sized Color TV

Description: This device is a bipolar analog integrated circuit designed for mono−chrome TV and small size color TV. It contains synchronous signal separator, vertical deflection signal generator, vertical power stage, and horizontal defection signal generator in a molded 16 pins dial in−line p

文件：88.57 Kbytes 页数：3 Pages

NTE

Integrated Circuit TV Hotizontal/Vertical Sync Signal Processor

Description: The NTE1664 is a silicon monolithic integrated circuit in a 22–Lead DIP type package designed for use as a horizontal deflection circuit and vertical deflection circuit for color TV sets. This device contains two synchronization signal separators, a vertical oscillator, vertical sa

文件：26.94 Kbytes 页数：3 Pages

NTE

Integrated Circuit 2 Channel Amp, 2.3W/Ch (4.7W BTL)

Features: Has Two Channels that can be used for Either Stereo or Bridge Amplifier High Outputs: 2 Channel (2.3W/Ch @ VCC = 9V, RL = 4Ω) Bridge Amp (4.7W @ VCC = 9V, RL = 8Ω) Voltage Gain is Variable by Externally Connected Feedback Resistors: 2 Channel (RNF = 27Ω,

文件：23.22 Kbytes 页数：2 Pages

NTE

Integrated Circuit TV SoundIF/Detector

Features: • Low Distortion: 0.02 • High Sensitivity: 200µVrms • Excellent AMR: −55dB Typ.

文件：79.75 Kbytes 页数：4 Pages

NTE

Single Phase Bridge Rectifier 2.0 Amp

Features: • Ideal for Printed Circuit Board • Surge Overload Rating: 50A (Peak)

文件：18.56 Kbytes 页数：2 Pages

NTE

Integrated Circuit Air Core Meter Driver

Description: The NTE1670 is a function generator/driver for air–core (moving–magnet) meter movements in a 14–Lead DIP type package. A Norton amplifier and an NPN transistor are included on chip for signal conditioning as required. Driver outputs are self–centering and develop ± 4.5V swing at 20

文件：22.86 Kbytes 页数：2 Pages

NTE