Integrated Circuit TV Vertical Deflection Output Circuit

Description: The NTE1684 is an integrated circuit in a 7–Lead SIP type package designed for use in TV vertical deflection output circuits. Features: • High Breakdown Voltage • Low Power Consumption

文件：22.94 Kbytes 页数：2 Pages

NTE

Integrated Circuit Dual AF Power Amp, 3.5W

Features: ● High Output: 3.5W typ. x 2 ● Soft Clip, Causing Little Harmonic Disturbance to Radios ● Small Pop Noise at the Time of Power Switch ON/OFF ● Built–in Protector Against Abnormal Modes (Thermal Shutdown, Overvoltage)

文件：21.52 Kbytes 页数：2 Pages

NTE

Linear Integrated Circuit Dual, 2.5W (7.8W BTL) Audio Amp

Description: The NTE1687 is a high performance stereo power amplifier in an 11–Lead SIP type package designed to deliver 1W/Ch into 4Ω or 2W bridged monaural into 8Ω. It is ideal for sensitive AM radio applications, exhibiting lower wideband noise, lower distortion, and less AM radiation than c

文件：25.33 Kbytes 页数：3 Pages

NTE

Integrated Circuit TV Tuner Bandswitch

Description: The NTE1688 is an integrated circuit in a 9–Lead SIP type package incorporating TV tuner band switch circuits and a 31V power supply circuit. Features: • Tuner Bandswitch Circuit with 31V Voltage Regulator

文件：21.89 Kbytes 页数：2 Pages

NTE

Integrated Circuit Head Amp Circuit for VCR

Features: • The Function Consist of: Video Signal Pre–Amplifier Circuit Head Switchover Circuit Drop–Out Compensation Circuit RF AGC Circuit • Low–Noise Head Amplifier • Supply Voltage: 5V

文件：21.69 Kbytes 页数：2 Pages

NTE

Single Phase Bridge Rectifier 2.0 Amp

Features: • Ideal for Printed Circuit Board • Surge Overload Rating: 50A (Peak)

文件：18.56 Kbytes 页数：2 Pages

NTE

Integrated Circuit Telephone DTMF Dialer

Description: The NTE1690 is a low threshold voltage, field–implanted, metal gate CMOS integrated circuit in a 16–Lead DIP type package. This device interfaces directly to a standard telephone keypad and generates all dual tone multi–frequency pairs required in tone dialing systems. The tone syn

文件：31.7 Kbytes 页数：4 Pages

NTE

Integrated Circuit Telephone Pulse Dialer w/Redial

Description: The NTE1691 and NTE1692 are monolithic CMOS integrated circuits in an 18–Lead DIP type package that provide all the features required for implementing a pulse dialer with redial. Features: • Uses Either a Standard 2 of 7 Matrix Keyboard with Negative True Common or the Inex

文件：28.1 Kbytes 页数：3 Pages

NTE

Integrated Circuit Telephone Pulse Dialer w/Redial

Description: The NTE1691 and NTE1692 are monolithic CMOS integrated circuits in an 18–Lead DIP type package that provide all the features required for implementing a pulse dialer with redial. Features: • Uses Either a Standard 2 of 7 Matrix Keyboard with Negative True Common or the Inex

文件：28.1 Kbytes 页数：3 Pages

NTE

Integrated Circuit Telephone Pulse Dialer (CMOS)

Description: The NTE1693 is a CMOS LSI pulse dialer in a 16–Lead DIP type package with redial which integrates a ceramic resonator as a frequency reference. Features: • Make Ratio: 33/39 Pin–Selectable. • Pulse Output: “1” True • Mute Output: “0” True • 17–Digit Redial with eit

文件：25.14 Kbytes 页数：3 Pages

NTE