Single Phase Bridge Rectifier 2.0 Amp

Features: • Ideal for Printed Circuit Board • Surge Overload Rating: 50A (Peak)

文件：18.56 Kbytes 页数：2 Pages

NTE

Integrated Circuit Telephone DTMF Dialer

Description: The NTE1690 is a low threshold voltage, field–implanted, metal gate CMOS integrated circuit in a 16–Lead DIP type package. This device interfaces directly to a standard telephone keypad and generates all dual tone multi–frequency pairs required in tone dialing systems. The tone syn

文件：31.7 Kbytes 页数：4 Pages

NTE

Integrated Circuit Telephone Pulse Dialer w/Redial

Description: The NTE1691 and NTE1692 are monolithic CMOS integrated circuits in an 18–Lead DIP type package that provide all the features required for implementing a pulse dialer with redial. Features: • Uses Either a Standard 2 of 7 Matrix Keyboard with Negative True Common or the Inex

文件：28.1 Kbytes 页数：3 Pages

NTE

Integrated Circuit Telephone Pulse Dialer w/Redial

Description: The NTE1691 and NTE1692 are monolithic CMOS integrated circuits in an 18–Lead DIP type package that provide all the features required for implementing a pulse dialer with redial. Features: • Uses Either a Standard 2 of 7 Matrix Keyboard with Negative True Common or the Inex

文件：28.1 Kbytes 页数：3 Pages

NTE

Integrated Circuit Telephone Pulse Dialer (CMOS)

Description: The NTE1693 is a CMOS LSI pulse dialer in a 16–Lead DIP type package with redial which integrates a ceramic resonator as a frequency reference. Features: • Make Ratio: 33/39 Pin–Selectable. • Pulse Output: “1” True • Mute Output: “0” True • 17–Digit Redial with eit

文件：25.14 Kbytes 页数：3 Pages

NTE

Integrated Circuit Telephone Pulse Dialer w/Redial

Description:\nThe NTE1691 and NTE1692 are monolithic CMOS integrated circuits in an 18–Lead DIP type package that provide all the features required for implementing a pulse dialer with redial.Features:\n• Uses Either a Standard 2 of 7 Matrix Keyboard with Negative True Common or the Inexpensive Form

NTE

Integrated Circuit Telephone Pulse Dialer w/Redial

NTE