Integrated Circuit Power Supply Control Circuit

Description: The NTE1672 is a control circuit in a 16–Lead DIP type package designed for use in switched mode power supplies. This single monolithic chip incorporates all the control and housekeeping (protection) functions required in switched mode power supplies, including an internal temperat

文件：29.85 Kbytes 页数：4 Pages

NTE

Integrated Circuit Video Chroma Processor

Description: The NTE1673 is a multifunctional integrated circuit in a 28–Lead DIP type package where an APC chroma circuit is formed so compactly as to use only 16 pins with the characteristic requirements remaining fulfilled and the rest of pins are used for video circuits. It contains a doubl

文件：24.95 Kbytes 页数：3 Pages

NTE

Integrated Circuit TV Vertical Deflection Output Circuit

Description: The NTE1674 is an integrated circuit in a 9–Lead SIP type package designed for use as a TV vertical deflection output circuit. When used in combination with a deflection signal processing IC, this device can facilitate a vertical output circuit design. Features: • Low Power

文件：26.94 Kbytes 页数：2 Pages

NTE

Integrated Circuit Dual AF Power Amp, 8.5W

Features: • Small idling current (20mA/2 channels) enabling prolonged battery life. • Small dependence of idling current on VCC. • High power (8.5W typ. X 2). • High ripple rejection (60dB at steady state). Since filters are arranged in 3 stages (including 1 stage inside IC) to attain

文件：84.39 Kbytes 页数：2 Pages

NTE

Integrated Circuit Frequency Synthesizer for TV/CATV

Integrated Circuit Frequency Synthesizer for TV/CATV

文件：22.69 Kbytes 页数：2 Pages

NTE

Integrated Circuit Switching Regulator for TV

Description: The NTE1687 is a switching regulator integrated circuit in a 14–Lead DIP type package especially designed for TV sets. This device can be used for both types of TV sets, insulated type and non–insu lated types. The NTE1687 operates in synchronizing with the horizontal retrace pu

文件：30.85 Kbytes 页数：3 Pages

NTE

Single Phase Bridge Rectifier 2.0 Amp

Features: • Ideal for Printed Circuit Board • Surge Overload Rating: 50A (Peak)

文件：18.56 Kbytes 页数：2 Pages

NTE

Integrated Circuit High Speed, 6 Diode Array, Common Anode

Description: The NTE1680 is a common anode monolithic array of high speed switching diodes in a 7–Lead SIP type package. Features: ● High Speed Switching Time: trr = 4.0ns Typ. ● Low Capacitance: Ct = 5.0pf TYP. ● Small Size Enables High Density Mounting

文件：19.97 Kbytes 页数：2 Pages

NTE

Integrated Circuit Pre-Amplifier Circuit for Remote Control Signal Receivers

Description: The NTE1682 is an integrated circuit in a 9–Lead SIP type package designed for use in infrared and various types of remote control signal receivers. Features: • High Sensitivity, High Gain, Low Noise • Waveform Shaping Circuit • Voltage Regulator Circuit

文件：20.82 Kbytes 页数：2 Pages

NTE

Integrated Circuit Horizontal/Vertical Processing Circuit

Description: The NTE1683 is an integrated circuit in an 18–Lead DIP type package designed for color TV deflection signal processing circuits. Features: • An auto–synchronized circuit, composed of a phase comparator circuit and a frequency–discriminator circuit • Vertical and horizont

文件：24.83 Kbytes 页数：3 Pages

NTE