Integrated Circuit Power Amp, 550mW, for Battery Operated Radios

Description: The NTE1627 is a monolithic integrated circuit in a 9–Lead SIP type package consisting of a power amplifier intended for applications such as portable radios, tape recorders, and intercoms. It operates from a supply voltage of 6V and can deliver the rated output power of 350mW (THD

文件：18.49 Kbytes 页数：2 Pages

NTE

Integrated Circuit TV Sync Separator Detector

Integrated Circuit TV Sync Separator Detector

文件：18.84 Kbytes 页数：2 Pages

NTE

Integrated Circuit VCR Cylinder Motor Driver

Description: The NTE1630 is an integrated circuit designed for VCR cylinder DD motor drive. Features: • 3−Phase motor drive circuit • 2 Phase−Hall element input circuit • PG, FG, generator circuit • Motor Lock Detector • Supply Voltage either 9V or 12V

文件：85.07 Kbytes 页数：2 Pages

NTE

Integrated Circuit FM Stereo Multiplexer w/ Soft Muting

Features: • Compact Package • Channel separation as well as high−frequency cutting can be controlled by means of control inputs • A control input us used to force monaural operation and inhibit oscillations when the applied voltage is low (VCC = 0V) • For a fixed−input waveform phase s

文件：78.86 Kbytes 页数：3 Pages

NTE

Integrated Circuit Vertical/Horizontal Sync Separator

Description: The NTE1632 separates the horizontal and vertical sync pulses from the composite TV video signal and uses them to synchronize vertical and horizontal oscillators. The NTE1632 is supplied in a 18−Lead DIP type package. Features: Horizontal sync separator & noise inverte

文件：109.36 Kbytes 页数：5 Pages

NTE

Integrated Circuit TV Sound Channel w/DC Controls

Description: The NTE1633 is a complete TV sound channel in a 20–Lead DIP type package with DC tone and volume controls plus separate VCR input and output connections. Supplied in a 20–pin DIP, the device delivers an output power of 4W into 16Ω (d = 10, VS = 24V) or 1.5W into 8Ω (d = 10, VS = 12

文件：29.14 Kbytes 页数：4 Pages

NTE

Integrated Circuit Dual Preamp w/ALC

Description: The NTE1634 is a monolithic integrated circuit in a 14–Lead DIP type package consisting of a dual equalizer amplifier with automatic level control (ALC) and is suitable for stereo radio cassette applications. Features: Dual Equalizer Amplifier with Built–In ALC Circuit.

文件：19.65 Kbytes 页数：2 Pages

NTE

Integrated Circuit Speaker Protector/Voltage/Temperature/Overload

Description: The NTE1635 is a monolithic integrated circuit in an 8–Lead SIP type package designed for use in protecting power amplifiers and speakers in various amplifier and receiver applications. Features: • Built–In Relay Driver • Single Power Source • Wide Operating Supply Ra

文件：23.4 Kbytes 页数：3 Pages

NTE

Integrated Circuit Dual AF Power Ampilifier, 4.3W

Features: • Built−in 2 Channels Enabling use in Stereo and Bridge Amplifier Applications. • Low Switching Distortion at High Frequencies • Minimum Number of External Parts Required: 9 Pcs. Min. (Stereo/Bridge) • Small Shock Noise at the Time of Power Supply ON/OFF due to Built−In Mutin

文件：85.3 Kbytes 页数：3 Pages

NTE

Integrated Circuit CMOS Clock Generator/Driver for BBDs

Description: The NTE1639 is a CMOS LSI Clock Generator ina 8–Lead DIP type package capable of generating two phase clock signals of low output impedance for use as a BBD driver. The built–in VGG power supply circuit provides the proper voltages needed for driving BBDs such as the NTE1641.

文件：32.27 Kbytes 页数：4 Pages

NTE