Single Phase Bridge Rectifier 2.0 Amp

Features: • Ideal for Printed Circuit Board • Surge Overload Rating: 50A (Peak)

文件：18.56 Kbytes 页数：2 Pages

NTE

Bridge Rectifiers

Features:\n• Ideal for Printed Circuit Board\n• Surge Overload Rating: 50A (Peak)

NTE

Integrated Circuit Audio Preamplifier

Features: • High Open−Loop Voltage Gain: 80dB Typ • High Input Impedance: 200kΩ Typ • Low Noise: 0.9µV Typ (Rg = 2.4kΩ, converted into input voltage)

文件：79.12 Kbytes 页数：2 Pages

NTE

Integrated Circuit Synchronization Signal Processor For B/W TV and Small-Sized Color TV

Description: This device is a bipolar analog integrated circuit designed for mono−chrome TV and small size color TV. It contains synchronous signal separator, vertical deflection signal generator, vertical power stage, and horizontal defection signal generator in a molded 16 pins dial in−line p

文件：88.57 Kbytes 页数：3 Pages

NTE

Integrated Circuit TV Hotizontal/Vertical Sync Signal Processor

Description: The NTE1664 is a silicon monolithic integrated circuit in a 22–Lead DIP type package designed for use as a horizontal deflection circuit and vertical deflection circuit for color TV sets. This device contains two synchronization signal separators, a vertical oscillator, vertical sa

文件：26.94 Kbytes 页数：3 Pages

NTE

Integrated Circuit 2 Channel Amp, 2.3W/Ch (4.7W BTL)

Features: Has Two Channels that can be used for Either Stereo or Bridge Amplifier High Outputs: 2 Channel (2.3W/Ch @ VCC = 9V, RL = 4Ω) Bridge Amp (4.7W @ VCC = 9V, RL = 8Ω) Voltage Gain is Variable by Externally Connected Feedback Resistors: 2 Channel (RNF = 27Ω,

文件：23.22 Kbytes 页数：2 Pages

NTE

Integrated Circuit TV SoundIF/Detector

Features: • Low Distortion: 0.02 • High Sensitivity: 200µVrms • Excellent AMR: −55dB Typ.

文件：79.75 Kbytes 页数：4 Pages

NTE

Integrated Circuit TV Hotizontal/Vertical Sync Signal Processor

Description:\nThe NTE1664 is a silicon monolithic integrated circuit in a 22–Lead DIP type package designed for use as a horizontal deflection circuit and vertical deflection circuit for color TV sets. This device contains two synchronization signal separators, a vertical oscillator, vertical sawtoo

NTE

Integrated circuit. 2 channel amp, 2.3W/Ch (4.7W BTL).

Features:\n Has Two Channels that can be used for Either Stereo or Bridge Amplifier\n High Outputs:\n    2 Channel (2.3W/Ch @ VCC = 9V, RL = 4Ω)\n    Bridge Amp (4.7W @ VCC = 9V, RL = 8Ω)\n Voltage Gain is Variable by Externally Connected Feedback Resistors:\n    2 Channel (RNF = 27Ω, VG = 50dB)\n  

NTE