NTE5061A thru NTE5105A Zener Diode, 1 Watt 5 Tolerance

Features: • Zener Voltage 110V to 200V • Low Cost • Low Zener Impedance • Excellent Clamping • Easily Cleaned with Freon, Alcohol, Chlorothene, and Similar Solvents

文件：52.32 Kbytes 页数：4 Pages

NTE

Integrated Circuit Audio Power Amplifier, 12W for Car Radio or Car Stereo

Features: • High Gain: 51dB Typ., HIgh Power Output: 12W Typ. • Low Number of External Components Required • Low Noise During Power ON/OFF Operation • Soft Tonal Quality in Saturated Power Output • Low Distortion Over Low to High Audio Frequency Range • Low Residual Noise: Rg = 0

文件：23.48 Kbytes 页数：3 Pages

NTE

Integrated Circuit Audio Power Amplifier, 12W for Car Radio or Car Stereo

Features: • High Gain: 51dB Typ., HIgh Power Output: 12W Typ. • Low Number of External Components Required • Low Noise During Power ON/OFF Operation • Soft Tonal Quality in Saturated Power Output • Low Distortion Over Low to High Audio Frequency Range • Low Residual Noise: Rg = 0

文件：23.48 Kbytes 页数：3 Pages

NTE

Integrated Circuit Audio Power Amp, 7W

Description: The NTE1392 and NTE1393 are class B power amplifiers in a 10–Lead SIP type package designed especially for home tpe stereo amplifiers. These devices provide an output power of 5W at 19V, and also 7W at 22V to an 8Ω load with 10 distortion. Features: • Available in Two Diffe

文件：23.59 Kbytes 页数：2 Pages

NTE

Integrated Circuit Audio Power Amp, 7W

Description: The NTE1392 and NTE1393 are class B power amplifiers in a 10–Lead SIP type package designed especially for home tpe stereo amplifiers. These devices provide an output power of 5W at 19V, and also 7W at 22V to an 8Ω load with 10 distortion. Features: • Available in Two Diffe

文件：23.59 Kbytes 页数：2 Pages

NTE

5.5W Dual Power Amplifier Car Radio, Car Stereo Output Audio Power Amplifier

Features: • Dual Mode or Bridge Connection Mode Type. • Some Protection Circuits Included • Thermal Protection, Over Voltage Protection, Current Limitter, BTL DC Short Protection. • Wide Operating Voltage Range: VCC(opr) = 8V to 18V • A chassis mounting is easily designed using SIP

文件：24.36 Kbytes 页数：2 Pages

NTE

Integrated Circuit Dual Audio Power Amplifier, 5.8W/Ch

Features: • Very Low Distortion • Easy to Mount • Overvoltage Handling Capability up to 50V for 200ms • Thermal Shut–Down Circuit Included • Fewer Number of External Components Required

文件：23.08 Kbytes 页数：2 Pages

NTE

Integrated Circuit 20W Bridge Booster for Car Radio

Description: The NTE1396 is a Class B dual audio power amplifier specifically designed for car radio applications. Power booster amplifiers are easily designed using this device that provides a high current capability (up to 3.5A) and that can drive very low impedance loads obtaining an output

文件：23.57 Kbytes 页数：3 Pages

NTE

Integrated Circuit Dual Audio Power Amplifier, 5.8W/Ch

Absolute Maximum Ratings: (TA = +25°C unless otherwise specified) Operating Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18V DC Supply Voltage . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . 26V Peak Supply Voltage (Note 1) . .

文件：22.03 Kbytes 页数：2 Pages

NTE

Integrated Circuit Dual, Audio Power Amp, 18W BTL

Integrated Circuit Dual, Audio Power Amp, 18W BTL

文件：21.32 Kbytes 页数：2 Pages

NTE