Integrated Circuit Cylinder Servo Control Circuit for VCR

Description: The NTE1428 is an integrated circuit designed for VTR’s cylinder servo control. Features: • Sample Hold System Speed Control • Incorporating Recording/Playback Switching Circuit • Supply Voltage Either 9V or 12V

文件：75.11 Kbytes 页数：2 Pages

NTE

NTE5061A thru NTE5105A Zener Diode, 1 Watt 5 Tolerance

Features: • Zener Voltage 110V to 200V • Low Cost • Low Zener Impedance • Excellent Clamping • Easily Cleaned with Freon, Alcohol, Chlorothene, and Similar Solvents

文件：52.32 Kbytes 页数：4 Pages

NTE

Integrated Circuit Audio Preamp

Description: The NTE1433 is a linear integrated circuit in a 7–Lead SIP type package designed for use in high voltage preamplification applications. Features: • Power Supply with Wide Working Voltage Range (20–42 Volts) • High Open Loop Gain • Extremely Low Distortion • Low Noi

文件：18.37 Kbytes 页数：2 Pages

NTE

Integrated Circuit Voltage Comparator

Description: The NTE1434 is an integrated circuit in a 5–Lead SIP type package designed for use as a voltage comparator that operates from a single power supply. Features: • Low Input Current • Wide Operating Voltage Range • Low Power Dissipation • High Output Breakdown Voltage

文件：18.92 Kbytes 页数：2 Pages

NTE

Integrated Circuit Dual Audio Preamp

Description: The NTE1435 is an integrated circuit in a 9–Lead SIP type package designed for preamp applications incorporating two channels such as car stereo applications. With stabilized power source built–in, this device offers high gain, low distortion, low noise, and high output voltage.

文件：18.72 Kbytes 页数：2 Pages

NTE

Integrated Circuit VIR Signal Processor

Description: The NTE1437 is an integrated circuit designed for color TV VIR (Vertical Interval Reference) signal processing circuits (with auto tint compensation circuit). Features: • Incorporating VIR signal discriminator color control, tint control and Y signal amplifier on a single c

文件：74.51 Kbytes 页数：3 Pages

NTE

Integrated Circuit Dual Attenuator

Description: The NTE1439 is an integrated circuit in a 14–Lead DIP type package which logarithmically controls the throughput (gain) of an audio signal by the DC voltage or resistance value and has 2 circuits. Since voltage is internally stabilized, the stable operations are assured at the allo

文件：21.11 Kbytes 页数：2 Pages

NTE

NTE5061A thru NTE5105A Zener Diode, 1 Watt 5 Tolerance

Features: • Zener Voltage 110V to 200V • Low Cost • Low Zener Impedance • Excellent Clamping • Easily Cleaned with Freon, Alcohol, Chlorothene, and Similar Solvents

文件：52.32 Kbytes 页数：4 Pages

NTE

Integrated Circuit FM IF Amplifier, Detector

Features: • High Limiting Sensitivity: 18µV Typ. • Low Distortion: 0.05 Typ Determined by the Linearity of Phase Characteristics in Phase Shifting Circuit • High Demodulation Output: 330mVrms Typ • High S/N Ratio: 78.5dB Typ • Muting at Detuning with Little Shock Noise • Single M

文件：23.65 Kbytes 页数：3 Pages

NTE

Integrated Circuit Balance Modulator

Features: • Broad Band (10MHz), Good Carrier Suppression • Carrier Suppression Within –40dB (10mVrms to 1Vrms Output Signal)

文件：18.14 Kbytes 页数：2 Pages

NTE