Integrated Circuit Dual, Audio Power Amp, 2.3W to 5W (4.6W to 15W BTL)

Description: The NTE1367 is an integrated circuit in an 18–Lead DIP type package designed for use in audio output applications with low noise, low distortion and high output widely ranging for power supply and load resistance. Two amps are built in allowing for dual or BTL operation. Featu

文件：30.3 Kbytes 页数：3 Pages

NTE

Integrated Circuit Dual Audio Power Amplifier, 5.8W/Channel

Description: The NTE1368 is an integrated circuit in a 12–Lead SIP type package designed for dual, low–frequency, high power amplifier applications. This device requires few external components, thus enabling high density mounting. Design for heat radiation is easy due to low thermal resistance

文件：22.9 Kbytes 页数：2 Pages

NTE

Integrated Circuit Audio Power Amplifier, 5.5W

Integrated Circuit Audio Power Amplifier, 5.5W

文件：79.09 Kbytes 页数：1 Pages

NTE

NTE5061A thru NTE5105A Zener Diode, 1 Watt 5 Tolerance

Features: • Zener Voltage 110V to 200V • Low Cost • Low Zener Impedance • Excellent Clamping • Easily Cleaned with Freon, Alcohol, Chlorothene, and Similar Solvents

文件：52.32 Kbytes 页数：4 Pages

NTE

Zener Diode, 1 Watt 짹5 Tolerance

Features: • Zener Voltage 110V to 200V • Low Cost • Low Zener Impedance • Excellent Clamping • Easily Cleaned with Freon, Alcohol, Chlorothene, and Similar Solvents

文件：30.78 Kbytes 页数：3 Pages

NTE

Integrated Circuit Audio Power Amplifier, 5.8W, for Car Radio

Features: • Output Power: POUT = 5.8W (Typ) at VCC = 13.2V, RL = 4Ω, THD = 10 POUT = 9.2W (Typ) at VCC = 13.2V, RL = 2Ω, THD = 10 • Maximum Output Power: POM = 9.5W (Typ) at VCC = 13.2V, RL = 4Ω • Low Distortion: THD = 0.15 at POUT = 1W, GV = 55dB THD = 0.07

文件：23.33 Kbytes 页数：2 Pages

NTE

Integrated Circuit Dual, Audio Power Amp, 5.3W/Ch

Features: • Built−in Protector Circuits (for surge and thermal, etc.) • Built−in Automatic Operating Point Stabilized Circuit • Low Distortion, Low L/F Noise • Small Transient Nosie at Power ON/OFF Switching • Good Channel Separation • Few External Components

文件：77.2 Kbytes 页数：2 Pages

NTE

Integrated Circuit Dual Audio Power Amplifier Circuit, 7.5W

Description: The NTE1373 is an integrated circuit designed for use as a 7.5W (16W, 4Ω) power amplifier output with low noise and low distortion suitable for TV sets with multi−sound. Stereo operation is possible due to incorporating two amplifiers on one 12−Lead SIP type chip. Features:

文件：84.89 Kbytes 页数：3 Pages

NTE

Integrated Circuit Audio Power Amplifier, 22W

Description: The NTE1376 is a monolithic integrated circuit in a 5–Lead TO220 type package intended for use as an audio class AB amplifier. Typically, it provides 22W output power (THD = 0.5) at VS = 32V/4Ω. This device provides high output current and has very low harmonic and cross–over disto

文件：24.16 Kbytes 页数：3 Pages

NTE

Integrated Circuit AF Power Amplifier, 6W/Channel

Features: • Built–In 2 Channels (Dual) Enabling use in Stereo and Bridge Amplifier Applications Dual: 6W x 2 Typ Bridge: 19W Typ • Minimum Number of External Parts Required • Low Pop Noise during Power Supply ON/OFF and Good Starting Balance • Good Ripple Rejection: 46dB Ty

文件：23.05 Kbytes 页数：2 Pages

NTE