Integrated Circuit Audio Power Amplifier, 10W

Description: The NTE1378 is a monolithic integrated circuit in a 5–Lead TO220 type package intended for use as an audio class AB amplifier. Typically, it provides 12W output power (THD = 10) at VS = ±12V/4Ω. This device provides high output current and has very low harmonic and cross–over disto

文件：24.45 Kbytes 页数：3 Pages

NTE

Zener Diode, 1 Watt 짹5 Tolerance

Features: • Zener Voltage 110V to 200V • Low Cost • Low Zener Impedance • Excellent Clamping • Easily Cleaned with Freon, Alcohol, Chlorothene, and Similar Solvents

文件：30.78 Kbytes 页数：3 Pages

NTE

NTE5061A thru NTE5105A Zener Diode, 1 Watt 5 Tolerance

Features: • Zener Voltage 110V to 200V • Low Cost • Low Zener Impedance • Excellent Clamping • Easily Cleaned with Freon, Alcohol, Chlorothene, and Similar Solvents

文件：52.32 Kbytes 页数：4 Pages

NTE

Integrated Circuit Audio Power Amplifier, 14W

Description: The NTE1380 is a monolithic integrated circuit in a 5–Lead TO220 type package intended for use as an audio class AB amplifier. Typically, it provides 14W output power (THD = 0.5) at VS = ±14V/4Ω. This device provides high output current and has very low harmonic and cross–over dist

文件：25.01 Kbytes 页数：3 Pages

NTE

Integrated Circuit Audio Power Amp, 2.1W

Features: • High Power Output at Low Voltage: PO = 2.1W Typ (9V, 4Ω) • Low Quiescent Current

文件：81.8 Kbytes 页数：2 Pages

NTE

Integrated Circuit Dual Audio Power Amp, 5.1W/Ch (10.5W BTL)

Description: The NTE1383 is an integrated circuit in an 18–Lead DIP designed for use as an audio output with low noise, low distortion, and high output for a wide range of power supply voltages and load resistance. Two built–in amplifiers provide dual or BTL operation. Typical applications incl

文件：26.51 Kbytes 页数：3 Pages

NTE

Integrated Circuit Dual, Audio Power Amplifier, 2.4W/Ch

Features: • Output Power: POUT = 2.4W/Ch (Typ) at VCC = 14V, RL = 8Ω, THD = 10 • Wide Operating Supply Voltage Range: VCC = 5.5V to 20V • Very Few External Components Required • Built–In Turn–On “POP” Noise Muting Circuit • Excellent Crosstalk: CT = –60dB (Typ)

文件：22.94 Kbytes 页数：2 Pages

NTE

Integrated Circuit Audio Power Amplifier, 5.8W, for Car Radio, Car Stereo

Features: • High Gain (52dB. Typ) and High Output (5.8W Typ) • Soft Clip • Few External Components • Built–In Thermal Cutoff Circuit Protects Against Load Short, Overload • Built–In Pop Noise Prevention Circuit Protects Against Power Supply ON Noise • May Be Used for Bridge Ampli

文件：23.41 Kbytes 页数：3 Pages

NTE

Integrated Circuit Dual, Audio Power Amplifier, 20W

Description: the NTE1389 is an audio power amplifier in a 12–Lead SIP type package specifically designed for car stereo applications. Typically, it provides 23W output power at 14.4V and 20W at 13.2V on a 4 Ohm load. This device can be used without capacitors because it incorporates the orig

文件：24.08 Kbytes 页数：3 Pages

NTE

Zener Diode, 1 Watt 짹5 Tolerance

Features: • Zener Voltage 110V to 200V • Low Cost • Low Zener Impedance • Excellent Clamping • Easily Cleaned with Freon, Alcohol, Chlorothene, and Similar Solvents

文件：30.78 Kbytes 页数：3 Pages

NTE