60V, 8-Channel Low-Side Driver with Serial Interface and Fault Indication

DESCRIPTION The MP6606 is an 8-channel low-side driver IC with a serial interface. The device integrates low-side MOSFET (LS-FET) switches and highside clamp diodes to drive inductive loads, which makes it well-suited for unipolar stepper motor and solenoid drives. The MP6606 operates from

文件：565.85 Kbytes 页数：16 Pages

MPS

美国芯源

35V, H-Bridge DC Motor Driver with SOIC-8 Package

DESCRIPTION The MP6614 is an H-bridge motor driver designed to drive reversible motors. The device can drive one DC motor, one winding of a stepper motor, or other loads. The H-bridge integrates four N-channel power MOSFETs, and an internal charge pump generates the required gate driver vol

文件：486.34 Kbytes 页数：16 Pages

MPS

美国芯源

5.4V to 28V, 5A,H-Bridge Motor Driver

DESCRIPTION The MP6619 is an H-bridge motor driver that operates from a supply voltage up to 28V and delivers a motor current up to 5A. The MP6619 is ideally suited to drive a brushed DC motor. The MP6619 also has cycle-by-cycle current limiting. Full protection features include over-curren

文件：1.33282 Mbytes 页数：14 Pages

MPS

美国芯源

丝印：BJX；Package：QFN-19；5.4V to 28V, 5A,H-Bridge Motor Driver

DESCRIPTION The MP6619 is an H-bridge motor driver that operates from a supply voltage up to 28V and delivers a motor current up to 5A. The MP6619 is ideally suited to drive a brushed DC motor. The MP6619 also has cycle-by-cycle current limiting. Full protection features include over-curren

文件：1.33282 Mbytes 页数：14 Pages

MPS

美国芯源

5.4V to 28V, 5A,H-Bridge Motor Driver

DESCRIPTION The MP6619 is an H-bridge motor driver that operates from a supply voltage up to 28V and delivers a motor current up to 5A. The MP6619 is ideally suited to drive a brushed DC motor. The MP6619 also has cycle-by-cycle current limiting. Full protection features include over-curren

文件：1.33282 Mbytes 页数：14 Pages

MPS

美国芯源

2.5V to 28V, 5A, H-Bridge Motor Driver Evaluation Board

DESCRIPTION The EV6619L-Q-00A evaluation board is designed to demonstrate the capabilities of the MP6619L, an H-Bridge motor driver. It operates from a supply input voltage (VIN) up to 28V, and can deliver a motor current up to 5A. The MP6619L is typically used to drive a brushed DC motor. The M

文件：534.51 Kbytes 页数：7 Pages

MPS

美国芯源

24V Input, 3A Peak Phase Current,Three-Phase BLDC Motor Driver

DESCRIPTION The MP6631 is a three-phase brushless DC (BLDC) motor driver with integrated power MOSFETs. The device supports a single external Hall-effect sensor or triple external Hall-effect sensors to drive a three-phase BLDC motor, with up to 3A of peak phase current and an input voltage

文件：1.06325 Mbytes 页数：27 Pages

MPS

美国芯源

丝印：6631；Package：QFN-26；24V Input, 3A Peak Phase Current,Three-Phase BLDC Motor Driver

DESCRIPTION The MP6631 is a three-phase brushless DC (BLDC) motor driver with integrated power MOSFETs. The device supports a single external Hall-effect sensor or triple external Hall-effect sensors to drive a three-phase BLDC motor, with up to 3A of peak phase current and an input voltage

文件：1.06325 Mbytes 页数：27 Pages

MPS

美国芯源

24V Input, 3A Peak Phase Current,Three-Phase BLDC Motor Driver

DESCRIPTION The MP6631 is a three-phase brushless DC (BLDC) motor driver with integrated power MOSFETs. The device supports a single external Hall-effect sensor or triple external Hall-effect sensors to drive a three-phase BLDC motor, with up to 3A of peak phase current and an input voltage

文件：1.06325 Mbytes 页数：27 Pages

MPS

美国芯源

Single-Phase, BLDC Motor Driver with Integrated Hall Sensor in a TSOT23-6 Package

DESCRIPTION The MP6650 is a single-phase, brushless, DC motor driver with integrated power MOSFETs and a Hall-effect sensor. The device drives single-phase brushless DC fan motors with up to 2A of output current. The IC has a 3.3V to 18V input voltage range and input line reversevoltage protectio

文件：1.33217 Mbytes 页数：24 Pages

MPS

美国芯源