12V, 2A, Three-Phase Power Stage

DESCRIPTION The MP6543 family of products are all threephase brushless DC motor drivers. They integrate three half-bridges, consisting of six Nchannel power MOSFETs, along with predrivers, gate drive power supplies, and currentsense amplifiers. The MP6543 has ENABLE and PWM inputs for each ½-H

文件：465.81 Kbytes 页数：16 Pages

MPS

美国芯源

45V, 2.5A, Simple Three-Phase Power Stage

DESCRIPTION The MP6545 is a three-phase power stage IC designed to drive brushless DC (BLDC) motors or other loads. The MP6545 operates across a 4.5V to 45V input voltage (VIN) range. It can deliver an output current (IOUT) up to 2.5A per phase, depending on the ambient temperature (TA) and

文件：786.36 Kbytes 页数：20 Pages

MPS

美国芯源

45V, 2.5A, Simple Three-Phase Power Stage with Current Measurement

DESCRIPTION The MP6545A is a three-phase power stage IC designed to drive brushless DC (BLDC) motors or other loads. The MP6545A operates across a 4.5V to 45V input voltage (VIN) range. It can deliver an output current (IOUT) up to 2.5A per phase, depending on the ambient temperature (TA) a

文件：788.63 Kbytes 页数：20 Pages

MPS

美国芯源

45V, 2.5A, Simple Three-Phase Power Stage with Current Measurement

DESCRIPTION The MP6545A is a three-phase power stage IC designed to drive brushless DC (BLDC) motors or other loads. The MP6545A operates across a 4.5V to 45V input voltage (VIN) range. It can deliver an output current (IOUT) up to 2.5A per phase, depending on the ambient temperature (TA) a

文件：788.63 Kbytes 页数：20 Pages

MPS

美国芯源

45V, 2.5A, Simple Three-Phase Power Stage

DESCRIPTION The MP6545 is a three-phase power stage IC designed to drive brushless DC (BLDC) motors or other loads. The MP6545 operates across a 4.5V to 45V input voltage (VIN) range. It can deliver an output current (IOUT) up to 2.5A per phase, depending on the ambient temperature (TA) and

文件：786.36 Kbytes 页数：20 Pages

MPS

美国芯源

45V, 2.5A, Simple Three-Phase Power Stage

DESCRIPTION The MP6545 is a three-phase power stage IC designed to drive brushless DC (BLDC) motors or other loads. The MP6545 operates across a 4.5V to 45V input voltage (VIN) range. It can deliver an output current (IOUT) up to 2.5A per phase, depending on the ambient temperature (TA) and

文件：786.36 Kbytes 页数：20 Pages

MPS

美国芯源

22V, 3A, Peak, 3-Phase BLDC Driver with 1MHz I2C Interface

DESCRIPTION The MP6546 is a 3-phase brushless DC (BLDC) motor driver for gimbal applications. It has three half-bridge power stages, pre-drivers, fieldoriented control (FOC) logic, and angle calculations. The MP6546 supports linear Hall angle inputs or an MPS magnetic angle sensor input. The

文件：1.08273 Mbytes 页数：24 Pages

MPS

美国芯源

14V, 5A, H-Bridge Motor Driver

DESCRIPTION The MP6551 is an H-bridge motor driver. Its 2.5V to 14V input voltage (VIN) range allows the device to operate from a variety of battery power sources, including single-cell lithium-ion batteries, dual-cell lithium-ion batteries, and 3- cell to 6-cell alkaline batteries. Its low

文件：1.14407 Mbytes 页数：16 Pages

MPSIND

美国芯源

丝印：BCR；Package：QFN-14；14V, 5A, H-Bridge Motor Driver

DESCRIPTION The MP6551 is an H-bridge motor driver. Its 2.5V to 14V input voltage (VIN) range allows the device to operate from a variety of battery power sources, including single-cell lithium-ion batteries, dual-cell lithium-ion batteries, and 3- cell to 6-cell alkaline batteries. Its low

文件：1.14407 Mbytes 页数：16 Pages

MPSIND

美国芯源

3-Phase BLDC Controller with a High-Accuracy Angular Sensor

DESCRIPTION The MP6570 is a high-performance motor controller that incorporates field-oriented control (FOC) algorithms, SVPWM modulation technology, and an accurate embedded angle sensor. The MP6570 is used for applications with three-phase PMSM and BLDC motors. The operation of the MP6570

文件：1.57046 Mbytes 页数：55 Pages

MPS

美国芯源