4-Channel, Low-Side Driver with I2C Interface

DESCRIPTION The MP6605C is a 4-channel, low-side driver IC with an I2C interface. The device integrates lowside MOSFET (LS-FET) switches and high-side clamp diodes to drive inductive loads. It is typically used for unipolar stepper motors and solenoid drivers. The MP6605C operates from a su

文件：671.73 Kbytes 页数：16 Pages

MPSIND

美国芯源

丝印：M6605C；Package：QFN-24；4-Channel, Low-Side Driver with I2C Interface

DESCRIPTION The MP6605C is a 4-channel, low-side driver IC with an I2C interface. The device integrates lowside MOSFET (LS-FET) switches and high-side clamp diodes to drive inductive loads. It is typically used for unipolar stepper motors and solenoid drivers. The MP6605C operates from a su

文件：671.73 Kbytes 页数：16 Pages

MPSIND

美国芯源

60V, 8-Channel Low-Side Driver with Serial Interface and Fault Indication

DESCRIPTION The MP6606 is an 8-channel low-side driver IC with a serial interface. The device integrates low-side MOSFET (LS-FET) switches and highside clamp diodes to drive inductive loads, which makes it well-suited for unipolar stepper motor and solenoid drives. The MP6606 operates from

文件：565.85 Kbytes 页数：16 Pages

MPS

美国芯源

丝印：MP6606；Package：TSSOP-20EP；60V, 8-Channel Low-Side Driver with Serial Interface and Fault Indication

DESCRIPTION The MP6606 is an 8-channel low-side driver IC with a serial interface. The device integrates low-side MOSFET (LS-FET) switches and highside clamp diodes to drive inductive loads, which makes it well-suited for unipolar stepper motor and solenoid drives. The MP6606 operates from

文件：565.85 Kbytes 页数：16 Pages

MPS

美国芯源

60V, 8-Channel Low-Side Driver with Serial Interface and Fault Indication

DESCRIPTION The MP6606 is an 8-channel low-side driver IC with a serial interface. The device integrates low-side MOSFET (LS-FET) switches and highside clamp diodes to drive inductive loads, which makes it well-suited for unipolar stepper motor and solenoid drives. The MP6606 operates from

文件：565.85 Kbytes 页数：16 Pages

MPS

美国芯源

35V, H-Bridge DC Motor Driver with SOIC-8 Package

DESCRIPTION The MP6614 is an H-bridge motor driver designed to drive reversible motors. The device can drive one DC motor, one winding of a stepper motor, or other loads. The H-bridge integrates four N-channel power MOSFETs, and an internal charge pump generates the required gate driver vol

文件：486.34 Kbytes 页数：16 Pages

MPS

美国芯源

5.4V to 28V, 5A,H-Bridge Motor Driver

DESCRIPTION The MP6619 is an H-bridge motor driver that operates from a supply voltage up to 28V and delivers a motor current up to 5A. The MP6619 is ideally suited to drive a brushed DC motor. The MP6619 also has cycle-by-cycle current limiting. Full protection features include over-curren

文件：1.33282 Mbytes 页数：14 Pages

MPS

美国芯源

丝印：BJX；Package：QFN-19；5.4V to 28V, 5A,H-Bridge Motor Driver

DESCRIPTION The MP6619 is an H-bridge motor driver that operates from a supply voltage up to 28V and delivers a motor current up to 5A. The MP6619 is ideally suited to drive a brushed DC motor. The MP6619 also has cycle-by-cycle current limiting. Full protection features include over-curren

文件：1.33282 Mbytes 页数：14 Pages

MPS

美国芯源

5.4V to 28V, 5A,H-Bridge Motor Driver

DESCRIPTION The MP6619 is an H-bridge motor driver that operates from a supply voltage up to 28V and delivers a motor current up to 5A. The MP6619 is ideally suited to drive a brushed DC motor. The MP6619 also has cycle-by-cycle current limiting. Full protection features include over-curren

文件：1.33282 Mbytes 页数：14 Pages

MPS

美国芯源

2.5V to 28V, 5A, H-Bridge Motor Driver Evaluation Board

DESCRIPTION The EV6619L-Q-00A evaluation board is designed to demonstrate the capabilities of the MP6619L, an H-Bridge motor driver. It operates from a supply input voltage (VIN) up to 28V, and can deliver a motor current up to 5A. The MP6619L is typically used to drive a brushed DC motor. The M

文件：534.51 Kbytes 页数：7 Pages

MPS

美国芯源