Quad 2-Input Multiplexer(Non-Inverting)

The MC10158 is a quad two channel multiplexer. A common select input determines which data inputs are enabled. A high (H) level enables data inputs D00, D10, D20, and D30 and a low (L) level enables data inputs D01, D11, D21, and D31. • PD=197 mW typ/pkg (No Load) • tpd=2.5 ns typ (Data to

文件：107.96 Kbytes 页数：4 Pages

ONSEMI

安森美半导体

Quad 2-Input Multiplexer(Inverting)

The MC10159 is a quad two channel multiplexer with enable. It incorporates common enable and common data select inputs. The select input determines which data inputs are enabled. A high (H) level enables data inputs D00, D10, D20, and D30. A low (L) level enables data inputs D01, D11, D21, and D31

文件：109.93 Kbytes 页数：4 Pages

ONSEMI

安森美半导体

12-Bit parity Generator-Checker

The MC10160 consists of nine Exclusive-OR gates in a single package, internally connected to provide odd parity checking or generation. Output goes high when an odd number of inputs are high. Unconnected inputs are pulled to low logic levels allowing parity detection and generation for less than 1

文件：84.77 Kbytes 页数：4 Pages

Motorola

摩托罗拉

Binary to 1-8 Decoder(Low)

The MC10161 is designed to decode a three bit input word to a one of eight line output. The selected output will be low while all other outputs will be high. The enable inputs, when either or both are high, force all outputs high. The MC10161 is a true parallel decoder. No series gating is used i

文件：120.67 Kbytes 页数：5 Pages

ONSEMI

安森美半导体

Binary to 1-8 Decoder (High)

Binary to 1-8 Decoder (High) The MC10162 is designed to convert three lines of input data to a one–of–eight output. The selected output will be high while all other outputs are low. The enable inputs, when either or both are high, force all outputs low. The MC10162 is a true parallel decoder. No

文件：91.36 Kbytes 页数：4 Pages

ONSEMI

安森美半导体

Binary to 1-8 Decoder (High)

Binary to 1-8 Decoder (High) The MC10162 is designed to convert three lines of input data to a one–of–eight output. The selected output will be high while all other outputs are low. The enable inputs, when either or both are high, force all outputs low. The MC10162 is a true parallel decoder. No

文件：91.36 Kbytes 页数：4 Pages

ONSEMI

安森美半导体

Binary to 1-8 Decoder (High)

Binary to 1-8 Decoder (High) The MC10162 is designed to convert three lines of input data to a one–of–eight output. The selected output will be high while all other outputs are low. The enable inputs, when either or both are high, force all outputs low. The MC10162 is a true parallel decoder. No

文件：91.36 Kbytes 页数：4 Pages

ONSEMI

安森美半导体

Binary to 1-8 Decoder (High)

Binary to 1-8 Decoder (High) The MC10162 is designed to convert three lines of input data to a one–of–eight output. The selected output will be high while all other outputs are low. The enable inputs, when either or both are high, force all outputs low. The MC10162 is a true parallel decoder. No

文件：91.36 Kbytes 页数：4 Pages

ONSEMI

安森美半导体

8-Line Multiplexer

The MC10164 is a high speed, low power eight–channel data selector which routes data present at one–of–eight inputs to the output. The data is routed according to the three bit code present on the address inputs. An enable input is provided for easy bit expansion. • PD = 310 mW typ/pkg (No Load)

文件：115.87 Kbytes 页数：5 Pages

ONSEMI

安森美半导体

8-Input Priority Encoder

The MC10165 is a device designed to encode eight inputs to a binary coded output. The output code is that of the highest order input. Any input of lower priority is ignored. Each output incorporates a latch allowing synchronous operation. When the clock is low the outputs follow the inputs and lat

文件：112.45 Kbytes 页数：6 Pages

Motorola

摩托罗拉