HIGH POWER LATCHING RELAY

Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach the

文件：386.65 Kbytes 页数：4 Pages

KG

HIGH POWER LATCHING RELAY

Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach the

文件：386.65 Kbytes 页数：4 Pages

KG

HIGH POWER LATCHING RELAY

Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach the

文件：386.65 Kbytes 页数：4 Pages

KG

HIGH POWER LATCHING RELAY

Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach the

文件：386.65 Kbytes 页数：4 Pages

KG

HIGH POWER LATCHING RELAY

Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach the

文件：386.65 Kbytes 页数：4 Pages

KG

HIGH POWER LATCHING RELAY

Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach the

文件：386.65 Kbytes 页数：4 Pages

KG

Field Effect Transistor Silicon N Channel MOS Type (L2−pai-MOSIII) Relay Drive, Motor Drive and DC−DC Converter

Relay Drive, Motor Drive and DC−DC Converter Applications ● 4-V gate drive ● Low drain−source ON-resistance : RDS (ON) = 25 mΩ (typ.) ● High forward transfer admittance : |Yfs| = 33 S (typ.) ● Low leakage current : IDSS = 100 μA (max) (VDS = 100 V) ● Enhancement mode : Vth = 0.8 to 2.0 V (VDS

文件：444.15 Kbytes 页数：6 Pages

TOSHIBA

东芝

N-channel MOS-FET

> Features - High Current - Low On-Resistance - No Secondary Breakdown - Low Driving Power - High Forward Transconductance > Applications - Motor Control - General Purpose Power Amplifier - DC-DC converters

文件：228.31 Kbytes 页数：2 Pages

Fuji

富士通

DIY Kit 139. Stereo 1W audio amplifier with DC volume control

DIY Kit 139. Stereo 1W audio amplifier with DC volume control The TDA7053A is an integrated stereo audio power amplifier with DC volume control in a 16-pin dual-in-line plastic package. It is designed for use in TVs and monitors but is also suitable for battery-operated equipment. The circuit us

文件：26.48 Kbytes 页数：2 Pages

ETCList of Unclassifed Manufacturers

未分类制造商

TOSHIBA Field Effect Transistor Silicon N Channel MOS Type (π-MOSⅦ)

Switching Regulator Applications Low drain-source ON resistance: RDS (ON) = 0.31 Ω (typ.) High forward transfer admittance: ⎪Yfs⎪ = 7.5 S (typ.) Low leakage current: IDSS = 10 μA (max) (VDS = 500 V) Enhancement-mode: Vth = 2.0 to 4.0 V (VDS = 10 V, ID = 1 mA)

文件：279.35 Kbytes 页数：6 Pages

TOSHIBA

东芝