特性
●最大输出峰值电流: 2.5A
2.5A maximum peak output current
●最小输出峰值电流: 2.0A
2.0A minximum peak output current
●最大传播延迟: 250ns
250ns maximum propagation delay
●饱和度侦测
Desaturation Detection
●米勒钳位
Miller clamping
●1.7A 的米勒钳位， 该脚不用时必须和 VEE 短接
1.7A Miller Clamp, clamp pin short to VEE if not used
●滞后的欠压锁定保护
●( UVLO)Under Voltage Lock-Out Protection (UVLO) with Hysteresis
●隔离的开路集电极故障反馈
Open Collector Isolated fault feedback
●SO-16 封装
Available in SO-16 package
●100ns 最大脉宽失真 ( PWD)
100ns maximum pulse width distortion (PWD)
●最小共模抑制比(CMR)： 50kV/μs ( VCM = 1500V)
50kV/μs minimum common mode rejection (CMR) at VCM = 1500V
●最大供电电流 ICC(max)< 4.5mA
ICC(max) < 4.5mA maximum supply current
●VCC 工作范围: 15 V ~ 30
VWide VCC operating range: 15 V to 30 V
●工作温度: –40°C ~ +110°
COperating Temperature: –40°C to +110°
●CIGBT 软关断
“Soft”IGBT Turn-off
●符合 AEC-Q101 车规标准
Meet AEC-Q101 vehicle regulation level standard
应用
●隔离型 IGBT 或隔离型功率 MOSFET 的栅极驱动
Isolated IGBT/ Power MOSFET gate drive
●交流和直流无刷电机驱动器
AC and_brushless DC motor drives
●工业逆变器
Industrial inverter
●不间断电源
Uninterruptible Power Supply (UPS)
