Dual USB UART / FIFO I.C.

General Description The FT2232D is a USB interface which incorporates the functionallity of two of FTDI’s second generation BM chips into a single device. A single downstream USB port is converted to two IO channels which can each be individually configured as a FT232BM-style UART interface, or

文件：935.74 Kbytes 页数：51 Pages

FTDI

飞特帝亚

USB to serial UART interface with optimised pin count for smaller PCB designs

The FT230X is a USB to serial UART interface with optimised pin count for smaller PCB designs and the following advanced features: • Single chip USB to asynchronous serial data transfer interface. • Entire USB protocol handled on the chip. No USB specific firmware programming required. •

文件：816.76 Kbytes 页数：44 Pages

FTDI

飞特帝亚

Future Technology Devices International Ltd.

The FT230X is a USB to serial UART interface with optimised pin count for smaller PCB designs and the following advanced features: • Single chip USB to asynchronous serial data transfer interface. • Entire USB protocol handled on the chip. No USB specific firmware programming required. •

文件：828.62 Kbytes 页数：44 Pages

FTDI

飞特帝亚

Future Technology Devices International Ltd.

The FT230X is a USB to serial UART interface with optimised pin count for smaller PCB designs and the following advanced features: • Single chip USB to asynchronous serial data transfer interface. • Entire USB protocol handled on the chip. No USB specific firmware programming required. •

文件：828.62 Kbytes 页数：44 Pages

FTDI

飞特帝亚

Future Technology Devices International Ltd.

The FT230X is a USB to serial UART interface with optimised pin count for smaller PCB designs and the following advanced features: • Single chip USB to asynchronous serial data transfer interface. • Entire USB protocol handled on the chip. No USB specific firmware programming required. •

文件：828.62 Kbytes 页数：44 Pages

FTDI

飞特帝亚

Future Technology Devices International Ltd.

The FT230X is a USB to serial UART interface with optimised pin count for smaller PCB designs and the following advanced features: • Single chip USB to asynchronous serial data transfer interface. • Entire USB protocol handled on the chip. No USB specific firmware programming required. •

文件：828.62 Kbytes 页数：44 Pages

FTDI

飞特帝亚

(USB to BASIC UART IC)

The FT230X is a USB to serial UART interface with optimised pin count for smaller PCB designs and the following advanced features: • Single chip USB to asynchronous serial data transfer interface. • Entire USB protocol handled on the chip. No USB specific firmware programming required. •

文件：816.76 Kbytes 页数：44 Pages

FTDI

飞特帝亚

Future Technology Devices International Ltd.

The FT230X is a USB to serial UART interface with optimised pin count for smaller PCB designs and the following advanced features: • Single chip USB to asynchronous serial data transfer interface. • Entire USB protocol handled on the chip. No USB specific firmware programming required. •

文件：828.62 Kbytes 页数：44 Pages

FTDI

飞特帝亚

Future Technology Devices International Ltd.

The FT230X is a USB to serial UART interface with optimised pin count for smaller PCB designs and the following advanced features: • Single chip USB to asynchronous serial data transfer interface. • Entire USB protocol handled on the chip. No USB specific firmware programming required. •

文件：828.62 Kbytes 页数：44 Pages

FTDI

飞特帝亚

Future Technology Devices International Ltd. FT231X (USB to FULL HANDSHAKE UART IC)

The FT231X is a USB to serial UART interface with full modem control and the following advanced features:  Single chip USB to asynchronous serial data transfer interface.  Entire USB protocol handled on the chip. No USB specific firmware programming required.  Fully integrated 2048 byte mult

文件：829.71 Kbytes 页数：44 Pages

FTDI

飞特帝亚