Superfast Silicon Rectifiers - Single Diode / Two Polarities

Superfast Silicon Rectifiers – Single Diode / Two Polarities • Nominal current 20 A • Repetitive peak reverse voltage 50...400 V • Plastic case TO-220AC • Weight approx. 1.8 g • Plastic material ha

文件：114.84 Kbytes 页数：2 Pages

DIOTEC

德欧泰克

FAST RECOVERY RECTIFIERS

PRV : 50 ~ 400 Volts Io : 20 Ampere FEATURES : * High current capability * High surge current capability * High reliability * Low reverse current * Low forward voltage drop • Pb / RoHS Free MECHANICAL DATA : * Case : Epoxy, Molded * Lead Temperature for Soldering Purposes: 260°C Max

文件：110.54 Kbytes 页数：2 Pages

EIC

NA Step-Index MM Fibers, TECS™ Clad

Features * Hard Cladding Increases Fiber Strength, Reduces Static Fatigue in Humid Environments, and Protects the Fiber During Buffer Stripping to Prevent Fiber Breakage * High Core-to-Clad Bonding Prevents Pistoning and Provides More Stable Crimp-and-Cleave or Epoxy Terminations * Shipped fr

文件：681.66 Kbytes 页数：1 Pages

ETCList of Unclassifed Manufacturers

未分类制造商

Dual USB UART / FIFO I.C.

General Description The FT2232D is a USB interface which incorporates the functionallity of two of FTDI’s second generation BM chips into a single device. A single downstream USB port is converted to two IO channels which can each be individually configured as a FT232BM-style UART interface, or

文件：907.48 Kbytes 页数：51 Pages

FTDI

飞特帝亚

Dual USB UART/FIFO I.C.

General Description The FT2232D is a USB interface which incorporates the functionallity of two of FTDI’s second generation BM chips into a single device. A single downstream USB port is converted to two IO channels which can each be individually configured as a FT232BM-style UART interface, or

文件：952.14 Kbytes 页数：56 Pages

FTDI

飞特帝亚

DUAL HIGH SPEED USB TO MULTIPURPOSE UART

The FT2232H is FTDI‟s 5th generation of USB devices. The FT2232H is a USB 2.0 High Speed (480Mb/s) to UART/FIFO IC. It has the capability of being configured in a variety of industry standard serial or parallel interfaces.

文件：1.64599 Mbytes 页数：60 Pages

FTDI

飞特帝亚

DUAL HIGH SPEED USB TO MULTIPURPOSE UART

The FT2232H is FTDI‟s 5th generation of USB devices. The FT2232H is a USB 2.0 High Speed (480Mb/s) to UART/FIFO IC. It has the capability of being configured in a variety of industry standard serial or parallel interfaces.

文件：1.64599 Mbytes 页数：60 Pages

FTDI

飞特帝亚

Cmod A7 Reference Manual

 System Features o 512KB SRAM with an 8-bit bus and 8ns access times o 4MB Quad-SPI Flash o USB-JTAG Programming Circuitry o Powered from USB or external 3.3-5.5V supply connected to DIP pins  System Connectivity o USB-UART bridge  Interaction and Sensory Devices o 2 LEDs o 1 RGB LED

文件：639.04 Kbytes 页数：10 Pages

ETCList of Unclassifed Manufacturers

未分类制造商

Dual USB UART / FIFO I.C.

General Description The FT2232D is a USB interface which incorporates the functionallity of two of FTDI’s second generation BM chips into a single device. A single downstream USB port is converted to two IO channels which can each be individually configured as a FT232BM-style UART interface, or

文件：935.74 Kbytes 页数：51 Pages

FTDI

飞特帝亚

USB to serial UART interface with optimised pin count for smaller PCB designs

The FT230X is a USB to serial UART interface with optimised pin count for smaller PCB designs and the following advanced features: • Single chip USB to asynchronous serial data transfer interface. • Entire USB protocol handled on the chip. No USB specific firmware programming required. •

文件：816.76 Kbytes 页数：44 Pages

FTDI

飞特帝亚