FT230X集成电路（IC）的控制器规格书PDF中文资料

The FT230X is a USB to serial UART interface with optimised pin count for smaller PCB designs and the following advanced features:

• Single chip USB to asynchronous serial data transfer interface.

• Entire USB protocol handled on the chip. No USB specific firmware programming required.

• Fully integrated 2048 byte multi-time programmable (MTP) memory, storing device descriptors and CBUS I/O configuration.

• Fully integrated clock generation with no external crystal required plus optional clock output selection enabling a glue-less interface to external MCU or FPGA.

• Data transfer rates from 300 baud to 3 Mbaud (RS422, RS485, and RS232) at TTL levels.

• 512 byte receive buffer and 512 byte transmit buffer utilising buffer smoothing technology to allow for high data throughput.

• FTDI’s royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases.

• Configurable CBUS I/O pins.

• Transmit and receive LED drive signals.

• UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity

• Synchronous and asynchronous bit bang interface options with RD# and WR# strobes.

• Configurable I/O pin output drive strength; 4 mA (min) and 16 mA (max).

• Integrated power-on-reset circuit.

• Fully integrated AVCC supply filtering - no external filtering required.

• UART signal inversion option.

• + 5V Single Supply Operation.

• Internal 3V3/1V8 LDO regulators

• Low operating and USB suspend current; 8mA (active-typ) and 70uA (suspend-typ).

• UHCI/OHCI/EHCI host controller compatible.

• USB 2.0 Full Speed compatible.

• Extended operating temperature range; -40 to 85⁰C.

• Available in compact Pb-free 16 pin SSOP and 16 pin QFN packages (both RoHS compliant).

Typical Applications

• USB to RS232/RS422/RS485 Converters

• Upgrading Legacy Peripherals to USB

• Utilising USB to add system modularity

• Incorporate USB interface to enable PC transfers for development system communication

• Cellular and Cordless Phone USB data transfer cables and interfaces

• Interfacing MCU/PLD/FPGA based designs to add USB connectivity

• USB Audio and Low Bandwidth Video data transfer

• USB Smart Card Readers

• USB Instrumentation

• USB Industrial Control

• USB MP3 Player Interface

• USB FLASH Card Reader and Writers

• Set Top Box PC - USB interface

• USB Digital Camera Interface

• USB Hardware Modems

• USB Wireless Modems

• USB Bar Code Readers

• USB dongle implementations for Software/Hardware Encryption and Wireless Modules

• Detection of dedicated charging port for battery charging at higher supply currents.