Radiation Hardened 3-to-8 Line Decoder/Demultiplexer

Description The Radiation Hardened ACS138MS is an Inverting 3-to-8 Line Decoder/Demultiplexer with three binary select inputs (A0, A1 and A2). If the device is enabled, these inputs determine which one of the eight normally high outputs will go low. Features • QML Qualified Per MIL-PRF-38535 Re

文件：48.91 Kbytes 页数：2 Pages

INTERSIL

Radiation Hardened 3-to-8 Line Decoder/Demultiplexer

Features • QML Qualified Per MIL-PRF-38535 Requirements • 1.25Micron Radiation Hardened SOS CMOS • Radiation Environment - Latch-up Free Under any Conditions - Total Dose . . . . . . . . . . . . . . . . . . . . . 3 x 105 RAD(Si) - SEU Immunity . . . . . . . . . . .

文件：186.56 Kbytes 页数：2 Pages

RENESAS

瑞萨

CMOS Inverting 3-to-8 Line Decoder/Demultiplexer

The Radiation Hardened ACS138MS is an Inverting 3-to-8 Line Decoder/Demultiplexer with three binary select inputs (A0, A1 and A2). If the device is enabled, these inputs determine which one of the eight normally high outputs will go low.\nTwo active low and one active high enable inputs (E1, E2 and

Renesas

瑞萨

1?뭥f?? Decoder/Demultiplexer

The MC74AC138/74ACT138 is a high−speed 1−of−8 decoder/demultiplexer. This device is ideally suited for high−speed bipolar memory chip select address decoding. The multiple input enables allow parallel expansion to a 1−of−24 decoder using just three MC74AC138/74ACT138 devices or a 1−of−32 decoder

文件：189.74 Kbytes 页数：11 Pages

ONSEMI

安森美半导体

1?뭥f?? Decoder/Demultiplexer

The MC74AC138/74ACT138 is a high−speed 1−of−8 decoder/demultiplexer. This device is ideally suited for high−speed bipolar memory chip select address decoding. The multiple input enables allow parallel expansion to a 1−of−24 decoder using just three MC74AC138/74ACT138 devices or a 1−of−32 decoder

文件：189.74 Kbytes 页数：11 Pages

ONSEMI

安森美半导体

Radiation Hardened TTL Input, 3-to-8 Line Decoder/Demultiplexer

Description The Radiation Hardened ACTS138MS is an Inverting 3-to-8 Line Decoder/Demultiplexer with three TTL level binary select inputs (A0, A1 and A2). If the device is enabled, these inputs determine which one of the eight normally high outputs will go low. Features • QML Qualified Per MIL-P

文件：48.89 Kbytes 页数：2 Pages

INTERSIL