Dual non-inverting Schmitt-trigger with 5 V tolerant input

DESCRIPTION The 74LVC2G17 is a high-performance, low-power, low-voltage, Si-gate CMOS device and superior to most advanced CMOS compatible TTL families. Inputs can be driven from either 3.3 V or 5 V devices. These feature allows the use of these devices as translators in a mixed 3.3 V and 5 V en

文件：96.61 Kbytes 页数：17 Pages

PHI

PHI

DUAL SCHMITT TRIGGER BUFFER

Description The 74LVC2G17 is a dual Schmitt trigger buffer gate with standard push-pull outputs. The device is designed for operation with a power supply range of 1.65V to 5.5V. The inputs are tolerant to 5.5V allowing this device to be used in a mixed voltage environment. The device is fully spe

文件：242.17 Kbytes 页数：10 Pages

DIODES

美台半导体

Dual non-inverting Schmitt trigger with 5 V tolerant input

General description The 74LVC2G17 provides two non-inverting buffers with Schmitt trigger input. It is capable of transforming slowly changing input signals into sharply defined, jitter-free output signals. Features and benefits ■ Wide supply voltage range from 1.65 V to 5.5 V ■ 5 V toler

文件：98.53 Kbytes 页数：16 Pages

恩XP

Dual non-inverting Schmitt-trigger with 5 V tolerant input

DESCRIPTION The 74LVC2G17 is a high-performance, low-power, low-voltage, Si-gate CMOS device and superior to most advanced CMOS compatible TTL families. Inputs can be driven from either 3.3 or 5 V devices. These feature allows the use of these devices as translators in a mixed 3.3 and 5 V enviro

文件：84 Kbytes 页数：16 Pages

ICST

Dual non-inverting Schmitt trigger with 5 V tolerant input

1. General description The 74LVC2G17 is a dual buffer with Schmitt-trigger inputs. Inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of these devices as translators in mixed 3.3 V and 5 V environments. This device is fully specified for partial power down appli

文件：258.3 Kbytes 页数：17 Pages

NEXPERIA

安世

Dual Schmitt-Trigger Buffer

Features + Operate From 1.65V to 5.5 5 V tolerant inputioutput for interfacing with 5 V logic. « £24mA output drive (Vee = 3.3V) ‘+ CMOS low-power consumption and high noise immunity « cer Supports Partial-Power-Down Mode Operation + Latoh-up performance exceeds 100mA + Specified fiom -40 °

文件：1.97376 Mbytes 页数：6 Pages

TECHPUBLIC

台舟电子

Dual non-inverting Schmitt trigger with 5 V tolerant input

文件：205.59 Kbytes 页数：19 Pages

恩XP

Dual Buffer with Schmitt-Trigger

The 74LVC2G17 is a dual Schmitt-trigger buffer which can accept supply voltage range from 1.65V to 5.5V. \nThe device features two independent buffers, but it may have different input threshold levels for positive-going (VT+) and negative-going (VT-) signals due to Schmitt-trigger action. The device • Wide Operating Voltage Range: 1.65V to 5.5V\n• Inputs Accept Voltages up to 5.5V\n• +24mA/-24mA Output Current at VCC = 3.0V\n• Low Power Dissipation: ICC = 2µA (MAX)\n• Propagation Delay: tPD = 7.5ns (TYP) at VCC = 3.3V\n• Support Partial Power-Down Mode\n• -40℃ to +125℃ Operating Temperature Ran;

SGMICRO

圣邦股份

Dual-gate

The 74LVC2G17 is a dual Schmitt trigger buffer gate with standard push-pull outputs. The device is designed for operation with a power supply range of 1.65V to 5.5V. The inputs are tolerant to 5.5V allowing this device to be used in a mixed voltage environment. The device is fully specified for part

Diodes

美台半导体

Dual non-inverting Schmitt-trigger with 5 V tolerant input

Renesas

瑞萨