Presettable synchronous 4-bit binary counter; synchronous reset

DESCRIPTION The 74LVC163 is a high-performance, low-power, low-voltage, Si-gate CMOS device and superior to most advanced CMOS compatible TTL families. FEATURES • Wide supply voltage range of 1.2 V to 3.6 V • In accordance with JEDEC standard no. 8–1A • Inputs accept voltages up to 5.5 V • C

文件：115.93 Kbytes 页数：12 Pages

PHI

PHI

Presettable synchronous 4-bit binary counter; synchronous reset

1. General description The 74LVC163 is a synchronous presettable binary counter which features an internal look-ahead carry and can be used for high-speed counting. Synchronous operation is provided by having all flip-flops clocked simultaneously on the positive-going edge of the clock (pin CP)

文件：295.6 Kbytes 页数：18 Pages

NEXPERIA

安世

16-bit D-type transparent latch with 5 Volt tolerant inputs/outputs 3-State

DESCRIPTION The 74LVC(H)16373A is a 16-bit D-type transparent latch featuring separate D-type inputs for each latch and 3-state outputs for bus oriented applications. One Latch Enable (LE) input and one Output Enable (OE) are provided for each octal. Inputs can be driven from either 3.3 or 5 V

文件：83.79 Kbytes 页数：10 Pages

PHI

PHI

16-bit D-type transparent latch with 5 V tolerant inputs/outputs; 3-state

DESCRIPTION The 74LVC(H)16373A is a 16-bit D-type transparent latch featuring separate D-type inputs for each latch and 3-state outputs for bus oriented applications. One Latch Enable (LE) input and one Output Enable (OE) are provided for each octal. Inputs can be driven from either 3.3 or 5 V

文件：114.24 Kbytes 页数：17 Pages

PHI

PHI

16-bit D-type transparent latch with 5 Volt tolerant inputs/outputs 3-State

DESCRIPTION The 74LVC(H)16373A is a 16-bit D-type transparent latch featuring separate D-type inputs for each latch and 3-state outputs for bus oriented applications. One Latch Enable (LE) input and one Output Enable (OE) are provided for each octal. Inputs can be driven from either 3.3 or 5 V

文件：83.79 Kbytes 页数：10 Pages

PHI

PHI

16-bit D-type transparent latch with 5 V tolerant inputs/outputs; 3-state

1. General description The 74LVC16373A and 74LVCH16373A are 16-bit D-type transparent latches with 3-state outputs. The devices can be used as two 8-bit transparent latches or a single 16-bit transparent latch. The devices feature two latch enables (1LE and 2LE) and two output enables (1OE and

文件：261.55 Kbytes 页数：15 Pages

NEXPERIA

安世

16-bit D-type transparent latch with 5 V tolerant inputs/outputs; 3-state

1. General description The 74LVC16373A and 74LVCH16373A are 16-bit D-type transparent latches with 3-state outputs. The devices can be used as two 8-bit transparent latches or a single 16-bit transparent latch. The devices feature two latch enables (1LE and 2LE) and two output enables (1OE and

文件：261.55 Kbytes 页数：15 Pages

NEXPERIA

安世

16-bit D-type transparent latch with 5 V tolerant inputs/outputs; 3-state

DESCRIPTION The 74LVC(H)16373A is a 16-bit D-type transparent latch featuring separate D-type inputs for each latch and 3-state outputs for bus oriented applications. One Latch Enable (LE) input and one Output Enable (OE) are provided for each octal. Inputs can be driven from either 3.3 or 5 V

文件：114.24 Kbytes 页数：17 Pages

PHI

PHI

16-bit D-type transparent latch with 5 Volt tolerant inputs/outputs 3-State

DESCRIPTION The 74LVC(H)16373A is a 16-bit D-type transparent latch featuring separate D-type inputs for each latch and 3-state outputs for bus oriented applications. One Latch Enable (LE) input and one Output Enable (OE) are provided for each octal. Inputs can be driven from either 3.3 or 5 V

文件：83.79 Kbytes 页数：10 Pages

PHI

PHI

丝印：LVC16373A；Package：TSSOP；SN74LVC16373A 16-Bit Transparent D-Type Latch With 3-State Outputs

1 Features 1• Member of the Texas Instruments Widebus™ Family • Operates From 1.65 V to 3.6 V • Inputs Accept Voltages to 5.5 V • Max tpd of 4.2 ns at 3.3 V • Typical VOLP (Output Ground Bounce) 2 V at VCC = 3.3 V, T

文件：697.75 Kbytes 页数：29 Pages

TI

德州仪器