Temperature Sensor

▪ Power Supply − VCC(Analog)=1.7 ー 1.9V − VDD(Digital)=0.81 ー 1.05V ▪ Temperature Range : -40 ー 125℃ ▪ Relative Temperature Accuracy (*Note): -7 ー +7℃ *Note: 2 points calibration is needed every IP.

文件：221.6 Kbytes 页数：1 Pages

RENESAS

瑞萨

FPD-Link Receiver for TSMC 28nm HPC

▪ Renesas FPD-Link Receiver can be used for analog receiver of following interface . - ANSI/TIA/EIA-644※ ▪ Technology is TSMC 28nm HPC+ 1p10M ▪ Supply voltage can be applied 1.0V for overdrive of core voltage, 1.8V for IO voltage. ▪ With an input clock at 71.5MHz, the maximum data rate of each

文件：177.3 Kbytes 页数：1 Pages

RENESAS

瑞萨

FPD-Link Transmitter for TSMC 28nm HPC

▪ Renesas FPD-Link Transmitter can be used for analog transmitter of following interface . - ANSI/TIA/EIA-644 ▪ Technology is TSMC 28nm HPC 1p9M. ▪ Supply voltage can be applied 1.0V for overdrive of core voltage, 1.8V for IO voltage. ▪ With an input clock at 75MHz and input data at 150Mbps, t

文件：168.72 Kbytes 页数：1 Pages

RENESAS

瑞萨

FPD-Link Receiver for TSMC 22nm ULP

▪ Renesas FPD-Link Receiver can be used for analog receiver of following interface . - ANSI/TIA/EIA-644※ ▪ Technology is TSMC 22nm ULP 1p10M. ▪ Supply voltage can be applied 0.9V for voltage, 1.8V for IO voltage. ▪ With an input clock at 85MHz, the maximum data rate of each channel is 595Mbps.

文件：177.33 Kbytes 页数：1 Pages

RENESAS

瑞萨

FPD-Link Receiver for TSMC 22nm ULP

▪ Renesas FPD-Link Receiver can be used for analog receiver of following interface . - ANSI/TIA/EIA-644※ ▪ Technology is TSMC 22nm ULP 1p10M. ▪ Supply voltage can be applied 0.9V for voltage, 1.8V for IO voltage. ▪ With an input clock at 85MHz, the maximum data rate of each channel is 595Mbps.

文件：177.33 Kbytes 页数：1 Pages

RENESAS

瑞萨

FPD-Link Transmitter for TSMC 22nm ULP

▪ Renesas FPD-Link Transmitter can be used for analog transmitter of following interface . - ANSI/TIA/EIA-644 ▪ Technology is TSMC 22nm ULP 1p10M. ▪ Supply voltage can be applied 0.9V for core voltage, 1.8V for IO voltage. ▪ With an input clock at 75MHz and input data at 75Mbps, the maximum tr

文件：167.92 Kbytes 页数：1 Pages

RENESAS

瑞萨

USB2.0 PHY for TSMC 22nm ULL Single-Port Transceiver

Renesas USB2.0 Transceiver can be used for analog transceiver of following interface . - Universal Serial Bus Specification Revision 2.0 - Battery Charging Specification Revision 1.2 - Technology is TSMC 22nm ULL 1p9M (6x2r). - Supply voltage can be applied 1.1V for core voltage and 3.3V for I

文件：115.87 Kbytes 页数：1 Pages

RENESAS

瑞萨

USB2.0 Full-Speed Transceiver for TSMC 22nm ULL

Renesas USB2.0 FS Transceiver can be used for analog transceiver of following interface . - Universal Serial Bus Specification Revision 2.0 Full/Low-Speed - Technology is TSMC 40nm LP 1p9M (6x2r). - Supply voltage can be applied 1.1V for core voltage and 3.3V for IO voltage. - USB transfer mod

文件：115.69 Kbytes 页数：1 Pages

RENESAS

瑞萨

MIPI D-PHY Transmitter/Receiver for TSMC 22nm ULL

• Renesas MIPI D-PHY Transmitter/Receiver can be used for analog Transmitter/Receiver of following interface . - MIPI alliance Specification for D-PHY Version 2.1 15 December 2016. - MIPI alliance Specification for Display Serial Interface (DSI) Version 1.3.1 Aug 2015. - MIPI alliance Specific

文件：108.34 Kbytes 页数：1 Pages

RENESAS

瑞萨

MIPI D-PHY Receiver for TSMC 22nm ULP

• Renesas MIPI D-PHY Receiver can be used for analog Receiver of following interface . - MIPI alliance Specification for D-PHY Version 2.1 15 December 2016. - MIPI alliance Specification for Camera Serial Interface 2 (CSI-2) Version 2.0 7 Dec 2016. • Technology is TSMC 22nm ULP 1p10M. • Supply

文件：108.95 Kbytes 页数：1 Pages

RENESAS

瑞萨