Integrated Circuit Audio Power Amplifier, 7W

Description: The NTE1115 and NTE1115A are monolithic integrated circuits designed for use as low frequency class B amplifiers. These devices provide 7W power output at 16V/4Ω, 6W at 14.4V/4Ω, 2.5W at 9V/Ω, 1W at 6V/4Ω and works with a wide range of supply voltages (4V to 20V); and gives high ou

文件：30.4 Kbytes 页数：4 Pages

NTE

Integrated Circuit Audio Power Amplifier, 5W

Description: The NTE1116 is a monolithic integrated circuit designed for use as a low frequency class B amplifier. The external cooling tabs enable 2.5 watts of output power to be achieved without the use of an external heat sink and 5 watts of output power using a small area of the P.C. board

文件：23.2 Kbytes 页数：2 Pages

NTE

Integrated Circuit Audio Power Amp, 2 Watt

Description: The NTE1117 is a monolithic integrated audio amplifier in a 14–Lead DIP type plastic package designed for use as a low frequency class B amplifier with a wide range of supply voltage of 3V to 16V. Features: • Minimum Working Voltage of 3V • Low Quiescent Current • Low

文件：26.08 Kbytes 页数：3 Pages

NTE

Silicon Small Signal Schottky Diode

Description: The NTE112 is a metal to silicon junction diode in a DO35 type package primarly intended for UHF mixers and ultrafast switching applications.

文件：18.6 Kbytes 页数：2 Pages

NTE

Integrated Circuit TV Video IF Amplifier

Features: • High Power Gain: 48dB Typ @ f = 58MHz • AGC Operating by External DC Control Voltage • High Gain Reduction: 60dB Min @ f = 58MHz • Low Reverse Transfer Admittance: 1.0µmho Typ @ f = 58MHz • Nearly Constant Input and Output Admittance Over Entire AGC Range

文件：22.9 Kbytes 页数：2 Pages

NTE

Integrated Circuit Color TV Demodulator

Features: • Color TV Demodulator (Function) • Color Difference Signal Amplifier • Chroma Demodulator • Color Matrix Circuit • DC Hue Control • High Sensitivity: Output VB –Y = 2.5Vp–p Input 0.2Vp–p • Including MOS Capacitance for Filter • Hue is controlled by DC

文件：27.99 Kbytes 页数：3 Pages

NTE

Integrated Circuit High Gain Audio Preamp

Features: • Power Supply with Wide Working Voltage Range • High Open–Loop Gain • Extremely Low Distortion • Low Noise • High Input Impedance and Low Output Impedance • Low Current Dissipation Applications: • Car Stereos • Tape Recorders

文件：20.28 Kbytes 页数：2 Pages

NTE

Integrated Circuit FM Multiplex Stereo Decoder

Integrated Circuit FM Multiplex Stereo Decoder

文件：80.9 Kbytes 页数：2 Pages

NTE

Integrated Circuit FM Tuning System

Absolute Maximum Ratings: (TA = +25°C unless otherwise specified) Supply Voltage (Pin 14), VCC . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . 15V Lamp Voltage, VLAMP . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . 20V Lamp Current, VLAMP . . . . . . . .

文件：77.98 Kbytes 页数：2 Pages

NTE

Integrated Circuit Audio Power Amplifier, 5.8W

Description: The NTE1155 is an integrated circuit in a 10–Lead SIP type package designed for use as an audio power amplifier for car radio and car stereo applications Features: • Output Power: POUT = 5.8W (Typ) at VCC = 13.2V, RL = 4Ω, THD = 10 POUT = 9.2W (Typ) at VCC = 13.

文件：22.54 Kbytes 页数：2 Pages

NTE