Integrated Circuit General Purpose Amp, Mixer, and Oscillator

Features: • General Amplifier Circuit • High Frequency Amplifier • Mixer, OSC and Modulator • Video Amplifier • Recommend RF and IF Amplifier (f = 0 to 100MHz) • AGC is possible

文件：21 Kbytes 页数：2 Pages

NTE

Integrated Circuit 3 Stage Audio Amplifier

Features: • Recommended for Driver of Push–Pull Output Stage • Possible to Drive 4 Watt Output Stage • Wide Range of Supply Voltage

文件：22 Kbytes 页数：2 Pages

NTE

Integrated Circuit General Purpose, Low Noise Preamplifier

Features: • Low Noise • Wide Operating Supply Voltage Range: VCC = 3V to 12V

文件：22.58 Kbytes 页数：2 Pages

NTE

Integrated Circuit Wide and Narrow Band Amp, FM/IF Limiter

Applications: • For FM IF Amplifier • For TV SIF Amplifier

文件：20.92 Kbytes 页数：2 Pages

NTE

Integrated Circuit FM Stereo Demodulator

Description: The NTE347 is designed for 13.6 volt, VHF large signal power amplifier applications required in military and industrial equipment operating to 240MHz. Features: • Low lead inductance stripline package for easier design and increased broadband capability. • Balanced Emitt

文件：74.79 Kbytes 页数：2 Pages

NTE

Germanium Diode General Purpose

Features: • Low Forward Voltage Drop • Low Power Consumption • Very Low Noise Level

文件：17.25 Kbytes 页数：1 Pages

NTE

Germanium Diode Point Contact Diode(Matched Pair)

Description: The NTE110MP is a matched pair (2) of germanium diodes designed for use in detector circuits of radios, televisions, stereos, and switching applications.

文件：16.67 Kbytes 页数：1 Pages

NTE

Integrated Circuit Audio Power Amp, 2W

Description: The NTE1110 is a 2 Watt Audio Power Amp packaged in a 16−Lead DIP plastic package with a heat sink fin.

文件：82.44 Kbytes 页数：3 Pages

NTE

Integrated Circuit Audio Power Amplifier, 4W @ 24V

Description: The NTE1112 is an integrated monolithic circuit in a 14−lead DIP plastic package with external heat−sink. Features: • Output Power 2.2W (18V−16Ω) • Low Quiescent Output Current • High Efficiency

文件：84.52 Kbytes 页数：2 Pages

NTE

Integrated Circuit Audio Power Amplifier, 7W

Description: The NTE1115 and NTE1115A are monolithic integrated circuits designed for use as low frequency class B amplifiers. These devices provide 7W power output at 16V/4Ω, 6W at 14.4V/4Ω, 2.5W at 9V/Ω, 1W at 6V/4Ω and works with a wide range of supply voltages (4V to 20V); and gives high ou

文件：30.4 Kbytes 页数：4 Pages

NTE