NE5534x, SA5534x Low-Noise Operational Amplifiers

1 Features 1• Equivalent Input Noise Voltage 3.5 nV/√Hz Typ • Unity-Gain Bandwidth 10 MHz Typ • Common-Mode Rejection Ratio 100 dB Typ output• High DC Voltage Gain 100 V/mV Typ • Peak-to-Peak Output Voltage Swing 32 V Typ With VCC± = ±18 V and RL = 600 Ω • High Slew Rate 13 V/μs Typ • Wid

文件：866.22 Kbytes 页数：27 Pages

TI

德州仪器

Dual High Slew Rate Op Amp

DESCRIPTION The NE/SE5535 is a new generation opertional amplififer featuring high slew rates combined with improved input characteristics. FEATURES • 15V/㎲ unity gain slew rates • Internel frequemcy compensation • Low Input offset voltage -2㎷ • Low Input Bias current 80㎁ Max • Short-circ

文件：499.29 Kbytes 页数：9 Pages

PHI

PHI

Dual High Slew Rate Op Amp

DESCRIPTION The NE/SE5535 is a new generation opertional amplififer featuring high slew rates combined with improved input characteristics. FEATURES • 15V/㎲ unity gain slew rates • Internel frequemcy compensation • Low Input offset voltage -2㎷ • Low Input Bias current 80㎁ Max • Short-circ

文件：499.29 Kbytes 页数：9 Pages

PHI

PHI

Dual High Slew Rate Op Amp

DESCRIPTION The NE/SE5535 is a new generation opertional amplififer featuring high slew rates combined with improved input characteristics. FEATURES • 15V/㎲ unity gain slew rates • Internel frequemcy compensation • Low Input offset voltage -2㎷ • Low Input Bias current 80㎁ Max • Short-circ

文件：499.29 Kbytes 页数：9 Pages

PHI

PHI

Sample-and-hold amplifier

DESCRIPTION The NE5537 monolithic sample-and-hold amplifier combines the best features of ion-implanted JFETs with bipolar devices to obtain high accuracy, fast acquisition time, and low droop rate. This device is pin-compatible with the LF198, and features superior performance in droop rate an

文件：103.95 Kbytes 页数：8 Pages

PHI

PHI

Sample-and-hold amplifier

DESCRIPTION The NE5537 monolithic sample-and-hold amplifier combines the best features of ion-implanted JFETs with bipolar devices to obtain high accuracy, fast acquisition time, and low droop rate. This device is pin-compatible with the LF198, and features superior performance in droop rate an

文件：103.95 Kbytes 页数：8 Pages

PHI

PHI

Sample-and-hold amplifier

DESCRIPTION The NE5537 monolithic sample-and-hold amplifier combines the best features of ion-implanted JFETs with bipolar devices to obtain high accuracy, fast acquisition time, and low droop rate. This device is pin-compatible with the LF198, and features superior performance in droop rate an

文件：103.95 Kbytes 页数：8 Pages

PHI

PHI

High frequency operational amplifier

DESCRIPTION The NE/SE5539 is a very wide bandwidth, high slew rate, monolithic operational amplifier for use in video amplifiers, RF amplifiers, and extremely high slew rate amplifiers. Emitter-follower inputs provide a true differential input impedance device. Proper external compensation will

文件：230.31 Kbytes 页数：14 Pages

PHI

PHI

High frequency operational amplifier

DESCRIPTION The NE/SE5539 is a very wide bandwidth, high slew rate, monolithic operational amplifier for use in video amplifiers, RF amplifiers, and extremely high slew rate amplifiers. Emitter-follower inputs provide a true differential input impedance device. Proper external compensation will

文件：230.31 Kbytes 页数：14 Pages

PHI

PHI

High frequency operational amplifier

DESCRIPTION The NE/SE5539 is a very wide bandwidth, high slew rate, monolithic operational amplifier for use in video amplifiers, RF amplifiers, and extremely high slew rate amplifiers. Emitter-follower inputs provide a true differential input impedance device. Proper external compensation will

文件：230.31 Kbytes 页数：14 Pages

PHI

PHI