TinyLogic ULP-A Buffer with 3-STATE Output

General Description The NC7SV126 is a single Buffer with 3-STATE output from Fairchild’s Ultra Low Power-A (ULP-A) Series of TinyLogic®. ULP-A is ideal for applications that require extreme high speed, high drive and low power. This product is designed for a wide low voltage operating range (0.9V

文件：303.6 Kbytes 页数：9 Pages

FairchildFairchild Semiconductor

仙童半导体飞兆/仙童半导体公司

TinyLogic ULP-A Buffer with Three-State Output

The NC7SV126 is a single 3−State buffer in tiny footprint packages. The device is designed to operate for VCC = 0.9 V to 3.6 V. Features • Designed for 0.9 V to 3.6 V VCC Operation • 1.8 ns tPD at 3.3 V (Typ) • Inputs/Outputs Over−Voltage Tolerant up to 3.6 V • IOFF Supports Partial Power

文件：243.32 Kbytes 页数：10 Pages

ONSEMI

安森美半导体

TinyLogic ULP-A Buffer with 3-STATE Output

文件：293.31 Kbytes 页数：9 Pages

FairchildFairchild Semiconductor

仙童半导体飞兆/仙童半导体公司

TinyLogic ULP-A Buffer with Three-State Output

文件：592.96 Kbytes 页数：13 Pages

ONSEMI

安森美半导体

TinyLogic ULP-A 缓冲器，带 3 态输出

NC7SV125是带3态输出的单通道缓冲器，属于飞兆TinyLogic®中的超低功耗(ULP-A)系列。 ULP-A是要求极高速、高驱动和低功耗应用的理想选择。 此产品设计用于宽低电压工作范围（0.9V到3.6V的VCC），适合驱动和速度要求高于TinyLogic ULP系列的应用，但仍具有同级最佳的低功耗运行特点。NC7SV126专为优化功耗和速度而设计，采用先进的CMOS技术制造，在实现高速运行的同时又能保持较低的CMOS功耗。 •0.9V至3.6V VCC电源操作范围\n•3.6V耐过压I/O，VCC 0.9V到3.6V\n•极高速tPD\n•1ns： 典型值，2.7V至3.6V VCC\n•1.8ns: 典型值，2.3V至2.7V VCC\n•3ns： 典型值，1.65V至1.95V VCC\n•3.5ns: 典型值，1.4V至1.6V VCC\n•6ns： 典型值，1.1V至1.3V VCC\n•13.0ns： 典型值，0.9V VCC\n•断电高阻抗输入和输出\n•高静态驱动(IOH/IOL)：\n•3.00V VCC时为± 24mA\n•2.30V VCC时为±18mA\n•1.65V VCC时为±6mA<\;

ONSEMI

安森美半导体

TinyLogic ULP-A Buffer with Three-State Output

The NC7SV126 is a single 3−State buffer in tiny footprint packages. The device is designed to operate for VCC = 0.9 V to 3.6 V. Features • Designed for 0.9 V to 3.6 V VCC Operation • 1.8 ns tPD at 3.3 V (Typ) • Inputs/Outputs Over−Voltage Tolerant up to 3.6 V • IOFF Supports Partial Power

文件：243.32 Kbytes 页数：10 Pages

ONSEMI

安森美半导体

TinyLogic ULP-A Buffer with 3-STATE Output

General Description The NC7SV126 is a single Buffer with 3-STATE output from Fairchild’s Ultra Low Power-A (ULP-A) Series of TinyLogic®. ULP-A is ideal for applications that require extreme high speed, high drive and low power. This product is designed for a wide low voltage operating range (0.9V

文件：303.6 Kbytes 页数：9 Pages

FairchildFairchild Semiconductor

仙童半导体飞兆/仙童半导体公司

丝印：H7；Package：MicroPak；TinyLogic ULP-A Buffer with Three-State Output

The NC7SV126 is a single 3−State buffer in tiny footprint packages. The device is designed to operate for VCC = 0.9 V to 3.6 V. Features • Designed for 0.9 V to 3.6 V VCC Operation • 1.8 ns tPD at 3.3 V (Typ) • Inputs/Outputs Over−Voltage Tolerant up to 3.6 V • IOFF Supports Partial Power

文件：243.32 Kbytes 页数：10 Pages

ONSEMI

安森美半导体

TinyLogic ULP-A Buffer with 3-STATE Output

General Description The NC7SV126 is a single Buffer with 3-STATE output from Fairchild’s Ultra Low Power-A (ULP-A) Series of TinyLogic®. ULP-A is ideal for applications that require extreme high speed, high drive and low power. This product is designed for a wide low voltage operating range (0.9V

文件：303.6 Kbytes 页数：9 Pages

FairchildFairchild Semiconductor

仙童半导体飞兆/仙童半导体公司

丝印：V26；Package：SC-88A；TinyLogic ULP-A Buffer with Three-State Output

The NC7SV126 is a single 3−State buffer in tiny footprint packages. The device is designed to operate for VCC = 0.9 V to 3.6 V. Features • Designed for 0.9 V to 3.6 V VCC Operation • 1.8 ns tPD at 3.3 V (Typ) • Inputs/Outputs Over−Voltage Tolerant up to 3.6 V • IOFF Supports Partial Power

文件：243.32 Kbytes 页数：10 Pages

ONSEMI

安森美半导体