CMOS ST-BUS??FAMILY Advanced Controller for E1

Description The MT9079 is a feature rich E1 (PCM 30, 2.048 Mbps) link framer and controller that meets the latest CCITT and ETSI requirements. The MT9079 will interface to a 2.048 Mbps backplane and can be controlled directly by a parallel processor, serial controller or through the ST-BUS.

文件：567.79 Kbytes 页数：54 Pages

MITEL

Visible Light Emitting Diode

FEATURES ◾ High Power Output ◾ Narrow Beam Angle ◾ High Reliability ◾ Stand-off Type APPLICATIONS ◾ Optical Sensor ◾ Indicators

文件：106.58 Kbytes 页数：1 Pages

MARKTECH

CMOS SMX - Switch Matrix Module

Description The MT9080 is a flexible memory module suitable for use as a basic building block in the construction of large digital switching matrices. It can be configured as either a Data Memory or a Connection Memory. Interface to the device is via 16 bit wide data and address busses. The MT908

文件：305.3 Kbytes 页数：24 Pages

MITEL

CMOS SMX - Switch Matrix Module

Description The MT9080 is a flexible memory module suitable for use as a basic building block in the construction of large digital switching matrices. It can be configured as either a Data Memory or a Connection Memory. Interface to the device is via 16 bit wide data and address busses. The MT908

文件：305.3 Kbytes 页数：24 Pages

MITEL

CMOS SMX - Switch Matrix Module

Description The MT9080B is a flexible memory module suitable for use as a basic building block in the construction of customized digital switching matrices. It can be configured as either a Data Memory or a Connection Memory, and is designed to interface with Mitel’s MT9085B. Interface to the dev

文件：123.3 Kbytes 页数：25 Pages

MITEL

CMOS SMX - Switch Matrix Module

Description The MT9080B is a flexible memory module suitable for use as a basic building block in the construction of customized digital switching matrices. It can be configured as either a Data Memory or a Connection Memory, and is designed to interface with Mitel’s MT9085B. Interface to the dev

文件：123.3 Kbytes 页数：25 Pages

MITEL

CMOS Flexible MVIP Interface Circuit

Description Mitel’s MT90810 is a Flexible MVIP Interface Circuit (FMIC). The MVIP (Multi-Vendor Integration Protocol) compliant device provides a complete MVIP compliant interface between the MVIP Bus and a wide variety of processors, telephony interfaces and other circuits. A built-in digital ti

文件：303.83 Kbytes 页数：34 Pages

MITEL

CMOS Flexible MVIP Interface Circuit

Description Mitel’s MT90810 is a Flexible MVIP Interface Circuit (FMIC). The MVIP (Multi-Vendor Integration Protocol) compliant device provides a complete MVIP compliant interface between the MVIP Bus and a wide variety of processors, telephony interfaces and other circuits. A built-in digital ti

文件：303.83 Kbytes 页数：34 Pages

MITEL

Integrated Digital Switch (IDX)

Description By integrating key functions needed in voice telecom application, the Integrated Digital Switch (IDX) provides a solution-on-a-chip for key telephone systems, PBX applications or CTI designs. Figure 2 shows a typical configuration. Features • 192 channel x 192 channel non-blocking s

文件：337.1 Kbytes 页数：105 Pages

MITEL

Integrated Digital Switch (IDX)

Description By integrating key functions needed in voice telecom application, the Integrated Digital Switch (IDX) provides a solution-on-a-chip for key telephone systems, PBX applications or CTI designs. Figure 2 shows a typical configuration. Features • 192 channel x 192 channel non-blocking s

文件：337.1 Kbytes 页数：105 Pages

MITEL