BRIDGE RECTIFIERS 10 Amps

BRIDGE RECTIFIERS 10 Amps

文件：902.47 Kbytes 页数：4 Pages

RFE

RFE international

SILICON BRIDGE RECTIFIERS

VOLTAGE RANGE: 50 --- 1000 V CURRENT: 15.0 A FEATURES ◇ Rating to 1000V PRV ◇ Surge overload rating to 300 Amperes peak ◇ Ideal for printed circuit board ◇ Reliable low cost construction utilizing molded plastic technique results in inexpensive product ◇ Lead solderable per MIL-STD-202 m

文件：101.07 Kbytes 页数：2 Pages

BILIN

银河微电

15 Amp Single Phase Bridge Rectifier 50 to 1000 Volts

Features • UL Recognized File # E165989 • Mounting Hole For #8 Screw, Plastic Case with Metal Bottom • Surge Rating Of 300 Amps • Case to Terminal Isolation Voltage 2500V • Halogen free available upon request by adding suffix -HF • Epoxy meets UL 94 V-0 flammability rating • Moisture Sensit

文件：238.75 Kbytes 页数：3 Pages

MCC

SINGLE PHASE 15 AMP BRIDGE RECTIFIERS

FEATURES * 300 amperes surge capability * Superior thermal design * Mounting: Hole thru for #8 screw

文件：67.22 Kbytes 页数：2 Pages

GWSEMI

唯圣电子

3A, 25V, 1.1MHz Step-Up Converter for WLED Applications

DESCRIPTION The EV1517 is the evaluation board used to demonstrate the white LED driver capabilities of the MP1517. The low 0.7V feedback voltage offers higher efficiency in white LED driver applications including cell phone camera flash. Soft-start, cycle-by-cycle current limiting and input unde

文件：198.13 Kbytes 页数：3 Pages

MPS

美国芯源

3A, 25V, 1.1MHz Step-Up Converter

DESCRIPTION The MP1517 is a 3A, fixed frequency step-up converter ideal for medium-to-high current step-up, flyback and SEPIC applications. The high 1.1MHz switching frequency allows for smaller external components producing a compact solution for size constrained cameras, PDAs and cell phones.

文件：316.92 Kbytes 页数：13 Pages

MPS

美国芯源

3A, 25V, 1.1MHz Step-Up Converter

DESCRIPTION The MP1517 is a 3A, fixed frequency step-up converter ideal for medium-to-high current step-up, flyback and SEPIC applications. The high 1.1MHz switching frequency allows for smaller external components producing a compact solution for size constrained cameras, PDAs and cell phones.

文件：316.92 Kbytes 页数：13 Pages

MPS

美国芯源

3A, 25V, 1.1MHz Step-Up Converter for WLED Applications

DESCRIPTION The EV1517 is the evaluation board used to demonstrate the white LED driver capabilities of the MP1517. The low 0.7V feedback voltage offers higher efficiency in white LED driver applications including cell phone camera flash. Soft-start, cycle-by-cycle current limiting and input unde

文件：198.13 Kbytes 页数：3 Pages

MPS

美国芯源

Fixed Frequency White LED Driver

DESCRIPTION The MP1518 is a step-up converter designed for driving up to 6 series white LEDs from a single cell Lithium Ion battery. The MP1518 uses current mode, fixed frequency architecture to regulate the LED current, which is measured through an external current sense resistor. Its low 104mV

文件：254.67 Kbytes 页数：9 Pages

MPS

美国芯源

Fixed Frequency White LED Driver

DESCRIPTION The MP1518 is a step-up converter designed for driving up to 6 series white LEDs from a single cell Lithium Ion battery. The MP1518 uses current mode, fixed frequency architecture to regulate the LED current, which is measured through an external current sense resistor. Its low 104mV

文件：254.67 Kbytes 页数：9 Pages

MPS

美国芯源