1x, 1.5x, 2x High Efficiency Charge Pump 4 White LED Driver

DESCRIPTION The MP1519 is a fully automatic driver for powering four white LEDs, with up to 4V forward voltage, from a single Li-Ion or three NiMH cells. The driver performs all of the sensing and control to run the LEDs at an optimum charge pump ratio for efficiency without an expensive inductor

文件：211.75 Kbytes 页数：8 Pages

MPS

美国芯源

Charge Pump 4-Channel WLED Driver

The MP1519 is a fully automatic driver for powering four white LEDs, with up to 4V forward voltage, from a single Li-Ion or three NiMH cells. The driver performs all of the sensing and control to run the LEDs at an optimum charge pump ratio for efficiency without an expensive inductor. The driver al ● 2% LED Current Matching \n● High Efficiency (>93%) \n● Current Source Outputs \n● No Ballast Resistors Required \n● 1x, 1.5x and 2x Automatic Modes \n● Constant Frequency Operation \n● Automatic LED Detection \n● High and Low Frequency PWM Capability \n● 2.5V to 5.5V Operation \n● Less tha;

MPS

美国芯源

1x, 1.5x, 2x High Efficiency Charge Pump 4 White LED Driver

DESCRIPTION The MP1519 is a fully automatic driver for powering four white LEDs, with up to 4V forward voltage, from a single Li-Ion or three NiMH cells. The driver performs all of the sensing and control to run the LEDs at an optimum charge pump ratio for efficiency without an expensive inductor

文件：211.75 Kbytes 页数：8 Pages

MPS

美国芯源

1x, 1.5x, 2x High Efficiency Charge Pump 4 White LED Driver Evaluation Board

GENERAL DESCRIPTION The EV0042 is an evaluation board for the MP1519, a fully automatic driver for powering four white LEDs, with up to 4V forward voltage, from a single Li-Ion or three NiMH cells. The driver performs all of the sensing and control to run the LEDs at an optimum charge pump ratio

文件：185.33 Kbytes 页数：3 Pages

MPS

美国芯源

1x, 1.5x, 2x High Efficiency Charge Pump 3 White LED Driver

DESCRIPTION The MP1519L is a fully automatic driver for powering three white LEDs, with up to 4V forward voltage, from a single Li-Ion or three NiMH cells. The driver performs all of the sensing and control to run the LEDs at an optimum charge pump ratio for efficiency without an expensive induct

文件：244.19 Kbytes 页数：9 Pages

MPS

美国芯源

1x, 1.5x, 2x High Efficiency Charge Pump 3 White LED Driver

DESCRIPTION The MP1519L is a fully automatic driver for powering three white LEDs, with up to 4V forward voltage, from a single Li-Ion or three NiMH cells. The driver performs all of the sensing and control to run the LEDs at an optimum charge pump ratio for efficiency without an expensive induct

文件：244.19 Kbytes 页数：9 Pages

MPS

美国芯源

1x, 1.5x, 2x High Efficiency Charge Pump 3 White LED Driver

DESCRIPTION The MP1519L is a fully automatic driver for powering three white LEDs, with up to 4V forward voltage, from a single Li-Ion or three NiMH cells. The driver performs all of the sensing and control to run the LEDs at an optimum charge pump ratio for efficiency without an expensive induct

文件：244.19 Kbytes 页数：9 Pages

MPS

美国芯源

1x, 1.5x, 2x High Efficiency Charge Pump 3 White LED Driver Evaluation Board

文件：179.23 Kbytes 页数：3 Pages

MPS

美国芯源

Charge Pump 3-Channel WLED Driver

The MP1519L is a fully automatic driver for powering three white LEDs, with up to 4V forward voltage, from a single Li-Ion or three NiMH cells. The driver performs all of the sensing and control to run the LEDs at an optimum charge pump ratio for efficiency without an expensive inductor. The driver ● 2% LED Current Matching \n● High Efficiency (>93%) \n● Current Source Outputs \n● No Ballast Resistors Required \n● 1x, 1.5x and 2x Automatic Modes \n● Constant Frequency Operation \n● Automatic LED Detection \n● High and Low Frequency PWM Capability \n● 2.5V to 5.5V Operation \n● Less tha;

MPS

美国芯源

Package：16-VFQFN 裸露焊盘；包装：管件 类别：集成电路（IC） LED 驱动器 描述：IC LED DRVR RGLTR ANALOG 16QFN

MPS

美国芯源