68HC11/Bidirectional-Compatible 關P Reset Circuit

General Description The MAX6314 low-power CMOS microprocessor (µP) supervisory circuit is designed to monitor power supplies in µP and digital systems. The MAX6314’s RESET output is bidirectional, allowing it to be directly connected to µPs with bidirectional reset inputs, such as the 68HC11. I

文件：114.09 Kbytes 页数：8 Pages

Maxim

美信

Supervisory Circuit Evaluation Kit

文件：118.27 Kbytes 页数：8 Pages

Maxim

美信

68HC11/双向微处理器复位电路

MAX6314低功耗CMOS微处理器(µP)监控电路可用于监控µP和数字系统中的电源。MAX6314具有双向低电平有效RESET输出，支持直接连接到具有双向复位输入的微处理器，例如68HC11。它无需外部元件，也不用进行调整，可实现非常可靠的低成本电路。MAX6314还提供去抖手动复位输入。\n\n 该器件执行单一功能：每当VCC电源电压下降至预设阈值以下或每当手动复位置位时，它都会将复位信号复位。在VCC上升到复位阈值以上或手动复位取消置位后，复位信号在内部编程的时间间隔（复位超时周期）内保持置位状态。\n\n MAX6314具有工厂调整的复位阈值电压，范围为2.5V至5 • 小型SOT143封装\n\n• 低电平有效RESET输出简化了与双向复位I/O的接口\n\n• 精密的出厂设置VCC复位阈值：\n• 2.5V至5V，增量为100mV\n\n\n\n\n• TA = +25°C时的复位阈值精度为±1.8%\n\n• 整个温度范围内的复位阈值精度为±2.5%\n\n• 提供四个复位超时周期：\n• 1ms、20ms、140ms或1120ms（最小值）\n\n\n\n\n• 不受VCC快速瞬变的影响\n\n• 电源电流：5µA\n\n• 与MAX811引脚兼容;

ADI

亚德诺

丝印：CN**；Package：SOT-143；68HC11/Bidirectional-Compatible 關P Reset Circuit

General Description The MAX6314 low-power CMOS microprocessor (µP) supervisory circuit is designed to monitor power supplies in µP and digital systems. The MAX6314’s RESET output is bidirectional, allowing it to be directly connected to µPs with bidirectional reset inputs, such as the 68HC11. I

文件：114.09 Kbytes 页数：8 Pages

Maxim

美信

丝印：DR**；Package：SOT-143；68HC11/Bidirectional-Compatible 關P Reset Circuit

General Description The MAX6314 low-power CMOS microprocessor (µP) supervisory circuit is designed to monitor power supplies in µP and digital systems. The MAX6314’s RESET output is bidirectional, allowing it to be directly connected to µPs with bidirectional reset inputs, such as the 68HC11. I

文件：114.09 Kbytes 页数：8 Pages

Maxim

美信

丝印：EW**；Package：SOT-143；68HC11/Bidirectional-Compatible 關P Reset Circuit

General Description The MAX6314 low-power CMOS microprocessor (µP) supervisory circuit is designed to monitor power supplies in µP and digital systems. The MAX6314’s RESET output is bidirectional, allowing it to be directly connected to µPs with bidirectional reset inputs, such as the 68HC11. I

文件：114.09 Kbytes 页数：8 Pages

Maxim

美信

丝印：FW**；Package：SOT-143；68HC11/Bidirectional-Compatible 關P Reset Circuit

General Description The MAX6314 low-power CMOS microprocessor (µP) supervisory circuit is designed to monitor power supplies in µP and digital systems. The MAX6314’s RESET output is bidirectional, allowing it to be directly connected to µPs with bidirectional reset inputs, such as the 68HC11. I

文件：114.09 Kbytes 页数：8 Pages

Maxim

美信

丝印：CM**；Package：SOT-143；68HC11/Bidirectional-Compatible 關P Reset Circuit

General Description The MAX6314 low-power CMOS microprocessor (µP) supervisory circuit is designed to monitor power supplies in µP and digital systems. The MAX6314’s RESET output is bidirectional, allowing it to be directly connected to µPs with bidirectional reset inputs, such as the 68HC11. I

文件：114.09 Kbytes 页数：8 Pages

Maxim

美信

丝印：DQ**；Package：SOT-143；68HC11/Bidirectional-Compatible 關P Reset Circuit

General Description The MAX6314 low-power CMOS microprocessor (µP) supervisory circuit is designed to monitor power supplies in µP and digital systems. The MAX6314’s RESET output is bidirectional, allowing it to be directly connected to µPs with bidirectional reset inputs, such as the 68HC11. I

文件：114.09 Kbytes 页数：8 Pages

Maxim

美信

丝印：EV**；Package：SOT-143；68HC11/Bidirectional-Compatible 關P Reset Circuit

General Description The MAX6314 low-power CMOS microprocessor (µP) supervisory circuit is designed to monitor power supplies in µP and digital systems. The MAX6314’s RESET output is bidirectional, allowing it to be directly connected to µPs with bidirectional reset inputs, such as the 68HC11. I

文件：114.09 Kbytes 页数：8 Pages

Maxim

美信