VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M675 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. An integrated SAW (surface acoustic wave) delay line implements the high-Q VCO (voltage controlled oscillator) function, which results in low output phase noise and very

文件：111.2 Kbytes 页数：6 Pages

IDT

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M675 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. An integrated SAW (surface acoustic wave) delay line implements the high-Q VCO (voltage controlled oscillator) function, which results in low output phase noise and very

文件：257.22 Kbytes 页数：6 Pages

ICST

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M675 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. An integrated SAW (surface acoustic wave) delay line implements the high-Q VCO (voltage controlled oscillator) function, which results in low output phase noise and very

文件：257.22 Kbytes 页数：6 Pages

ICST

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M675 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. An integrated SAW (surface acoustic wave) delay line implements the high-Q VCO (voltage controlled oscillator) function, which results in low output phase noise and very

文件：257.22 Kbytes 页数：6 Pages

ICST

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M675 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. An integrated SAW (surface acoustic wave) delay line implements the high-Q VCO (voltage controlled oscillator) function, which results in low output phase noise and very

文件：257.22 Kbytes 页数：6 Pages

ICST

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M675 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. An integrated SAW (surface acoustic wave) delay line implements the high-Q VCO (voltage controlled oscillator) function, which results in low output phase noise and very

文件：257.22 Kbytes 页数：6 Pages

ICST

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M675 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. An integrated SAW (surface acoustic wave) delay line implements the high-Q VCO (voltage controlled oscillator) function, which results in low output phase noise and very

文件：257.22 Kbytes 页数：6 Pages

ICST

M6759 : 8 Bit MTP Micro-controller

[Acer Laboratories Inc.] General Description The M6759 is an 8032/8052 instruction compatible 8-bit microcontroller with MTP Flash ROM for firmware updating. By combining a versatile 8-bit CPU with MTP-Flash, this device provides whole microcontroller system on one chip and still remains the fea

文件：136.13 Kbytes 页数：8 Pages

ETCList of Unclassifed Manufacturers

未分类制造商

HIGH PERFORMANCE CMOS 16-BIT SINGLE CHIP MICROCONTROLLER

文件：538.02 Kbytes 页数：14 Pages

OKIOki Electric Cable Co.,Ltd

冲电线日本冲电线株式会社

806-870MHz,7.5V,4W,FM PORTABLE RADIO

RF POWER MODULE 806-870MHz,7.5V,4W,FM PORTABLE RADIO

文件：91.72 Kbytes 页数：2 Pages

Mitsubishi

三菱电机