Double-Balanced Mixer

Description The M67 is a double balanced mixer, designed for use in military, commercial and test equipment applications. The design utilizes Schottky ring quad diodes and broadband soft dielectric and ferrite baluns to attain excellent performance. This mixer can also be used as a phase detector

文件：1.11834 Mbytes 页数：3 Pages

MA-COM

DOUBLE-BALANCED MIXER

DOUBLE-BALANCED MIXER • LO 7 TO 17 GHz • RF 9 TO 15 GHz • IF DC TO 2.5 GHz • LO DRIVE: +10 dBm (nominal) • LOW NOISE FIGURE: 6.5 dB (TYP.)

文件：134.16 Kbytes 页数：2 Pages

MACOM

Double-Balanced Mixer

Description The M67 is a double balanced mixer, designed for use in military, commercial and test equipment applications. The design utilizes Schottky ring quad diodes and broadband soft dielectric and ferrite baluns to attain excellent performance. This mixer can also be used as a phase detector

文件：514.179 Kbytes 页数：3 Pages

MACOM

SIMPLE MELODY GENERATOR

DESCRIPTION The M67 series are low power CMOS LSI in TO-92 package, designed for the application of melody generation. The build in oscillator and strong driving capability minimise the external component required. A maximum of 128 notes can be programmed and repeat mode. It is suitable for use i

文件：50.49 Kbytes 页数：2 Pages

MICRO-ELECTRONICS

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M670 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. Its integrated SAW (surface acoustic wave) delay line provides low phase jitter. The M670 is available in a range of center frequencies. Minimum pull-range is ±50 ppm (wide

文件：359.04 Kbytes 页数：6 Pages

ICST

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M670 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. Its integrated SAW (surface acoustic wave) delay line provides low phase jitter. The M670 is available in a range of center frequencies. Minimum pull-range is ±50 ppm (wide

文件：359.04 Kbytes 页数：6 Pages

ICST

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M670 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. Its integrated SAW (surface acoustic wave) delay line provides low phase jitter. The M670 is available in a range of center frequencies. Minimum pull-range is ±50 ppm (wide

文件：359.04 Kbytes 页数：6 Pages

ICST

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M670 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. Its integrated SAW (surface acoustic wave) delay line provides low phase jitter. The M670 is available in a range of center frequencies. Minimum pull-range is ±50 ppm (wide

文件：359.04 Kbytes 页数：6 Pages

ICST

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M670 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. Its integrated SAW (surface acoustic wave) delay line provides low phase jitter. The M670 is available in a range of center frequencies. Minimum pull-range is ±50 ppm (wide

文件：359.04 Kbytes 页数：6 Pages

ICST

VOLTAGE CONTROLLED SAW OSCILLATOR

GENERAL DESCRIPTION The M670 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. Its integrated SAW (surface acoustic wave) delay line provides low phase jitter. The M670 is available in a range of center frequencies. Minimum pull-range is ±50 ppm (wide

文件：359.04 Kbytes 页数：6 Pages

ICST