Isolated USB Transceiver with Isolated Power

FEATURES - LTM2884: 2500VRMS for 1 Minute - LTM2884(a): 3000VRMS for 1 Minute - LTM2884: UL Recognized File #E151738 - LTM2884(a): CSA Recognized File #255632 - USB 2.0 Full Speed and Low Speed Compatible - Integrated Isolated DC/DC Converter, External or Bus Powered - Auto-Configuration o

文件：1.42709 Mbytes 页数：24 Pages

AD

亚德诺

Single-Bus RS485/RS232 Multiprotocol Transceiver with Switchable Termination

DESCRIPTION The LTC®2873 is a robust pin-configurable multiprotocol transceiver that supports RS232, RS485, and RS422 protocols while operating on a single 3V to 5.5V supply. The LTC2873 can be configured as a half-duplex RS485 transceiver or as an RS232 transceiver using the same two bus pins.

文件：1.62623 Mbytes 页数：32 Pages

AD

亚德诺

7.5kVRMS SPI/Digital or I2C 關Module Isolator with Transformer Driver

DESCRIPTION The LTM®2810 is a complete galvanic digital μModule® (micromodule) isolator. No external components are required. Individual 3V to 5.5V supplies power each side of the digital isolator. Separate logic supply pins allow easy interfacing with different logic levels from 1.62V to 5.

文件：1.3482 Mbytes 页数：30 Pages

AD

亚德诺

7.5kVRMS SPI/Digital or I2C 關Module Isolator with Transformer Driver

DESCRIPTION The LTM®2810 is a complete galvanic digital μModule® (micromodule) isolator. No external components are required. Individual 3V to 5.5V supplies power each side of the digital isolator. Separate logic supply pins allow easy interfacing with different logic levels from 1.62V to 5.

文件：1.3482 Mbytes 页数：30 Pages

AD

亚德诺

6500VRMS Isolated RS485/RS422 μModule Transceiver Power

FEATURES - RS485/RS422 Transceiver: 6500VRMS for 1 Minute - CSA (IEC/UL) Approved, File #255632 - Isolated DC Power: 5V at 200mA - No External Components Required - 20Mbps or Low EMI 250kbps Data Rate - High ESD: ±15kV HBM on Transceiver Interface - High Common Mode Transient Immunity: 50kV

文件：1.59431 Mbytes 页数：22 Pages

AD

亚德诺

Isolated USB Data Transceiver

FEATURES - Isolated USB Transceiver: 7500VRMS for 1 Minute - CSA (IEC/UL) Approved, File #255632 - Reinforced Insulation - USB 2.0 Full Speed and Low Speed Compatible - Auto-Configuration of Bus Speed - 4.4V to 36V VBUS and VBUS2 Operating Range - 3.3V LDO Output Supply Signal References VL

文件：671.83 Kbytes 页数：18 Pages

AD

亚德诺

Isolated USB Transceiver with Isolated Power

FEATURES - LTM2884: 2500VRMS for 1 Minute - LTM2884(a): 3000VRMS for 1 Minute - LTM2884: UL Recognized File #E151738 - LTM2884(a): CSA Recognized File #255632 - USB 2.0 Full Speed and Low Speed Compatible - Integrated Isolated DC/DC Converter, External or Bus Powered - Auto-Configuration o

文件：1.42709 Mbytes 页数：24 Pages

AD

亚德诺

I2C Slave Device Extender Over Rugged Differential Link

DESCRIPTION The LTC®4331 is a point-to-point SMBus compatible I2C slave device extender designed for operation in high noise industrial environments. Using a ±60V fault protected differential transceiver, the LTC4331 can extend an I2C/ SMBus bus, including SMBALERT and a control signal, over

文件：242.47 Kbytes 页数：26 Pages

AD

亚德诺

SPI Extender Over Rugged Differential Link

DESCRIPTION The LTC®4332 is a point-to-point rugged SPI extender designed for operation in high noise industrial environments over long distances. Using a ±60V fault protected differential transceiver, the LTC4332 can transmit SPI data, including an interrupt signal, up to 2MHz over two twist

文件：1.43605 Mbytes 页数：22 Pages

AD

亚德诺

Isolated USB Data Transceiver

FEATURES - Isolated USB Transceiver: 7500VRMS for 1 Minute - CSA (IEC/UL) Approved, File #255632 - Reinforced Insulation - USB 2.0 Full Speed and Low Speed Compatible - Auto-Configuration of Bus Speed - 4.4V to 36V VBUS and VBUS2 Operating Range - 3.3V LDO Output Supply Signal References VL

文件：671.83 Kbytes 页数：18 Pages

AD

亚德诺