LSF0204-Q1 Automotive Qualified 4-Bit Auto-Bidirectional Multi-Voltage Level Translator

1 Features • AEC-Q100 qualified for automotive applications – Temperature grade 1: –40°C ≤ TA ≤ 125°C – Device HBM ESD classification level 2 – CDM ESD classification level C6 • Provides auto-bidirectional voltage translation without direction pin • Supports open drain or push-pull applicat

文件：1.09121 Mbytes 页数：26 Pages

TI

德州仪器

LSF0204x 4-Bits Bidirectional Multi-Voltage Level Translator for Open-Drain and Push-Pull Application

1 Features • Provides bidirectional voltage translation with no direction terminal • Supports up to 100-MHz up translation and greater than 100-MHz down translation at ≤ 30-pF capacitor load and up to 40-MHz up/ down translation at 50-pF capacitor load • Supports Ioff, partial power-down mo

文件：2.48097 Mbytes 页数：39 Pages

TI

德州仪器

4-bit bidirectional multi-voltage level translator; open-drain; push-pull

1. General description The LSF0204 is an 4 channel bidirectional multi-voltage level translator for open-drain and push-pull applications. It supports up to 100 MHz up translation and ≥ 100 MHz down translation at ≤ 30 pF capacitive load. There is no need for a direction pin which minimizes sys

文件：244.8 Kbytes 页数：14 Pages

NEXPERIA

安世

Automotive Qualified 4-Bit Auto-Bidirectional Multi-Voltage Level Translator

文件：477.54 Kbytes 页数：21 Pages

TI

德州仪器

4-Bits Bidirectional Multi-Voltage Level Translator

文件：1.42305 Mbytes 页数：32 Pages

TI

德州仪器

适用于漏极开路和推挽应用的 4 位双向多电压电平转换器

LSF 系列包含双向电压电平转换器，该转换器可在 0.8V 至 4.5V (Vref_A) 和 1.8V 至 5.5V (Vref_B) 电压范围内运行。该范围支持在 0.8V 和 5.0V 之间进行双向电压转换，无需在漏极开路或推挽应用中使用方向端子。对于采用 15pF 电容器和 165Ω 上拉电阻器的漏极开路系统，LSF 系列支持传输速度大于 100MHz 的电平转换应用。\n\n当 An 或 Bn 端口为低电平时，此开关处于接通状态，而且 An 和 Bn 端口之间存在低电阻连接。开关的低 Ron 可实现具有超小传播延迟和信号失真的连接。A 端或 B 端的电压将限制为 Vref_A，且可上 • 无需方向端子即可提供双向电压转换\n• 支持 Ioff、局部断电模式（参阅特性说明）\n• 0.8V ↔ 1.8/2.5/3.3/5V\n• 1.8V ↔ 2.5/3.3/5V\n• 3.3V ↔ 5V\n• 低待机电流\n• 低 Ron 可实现较少的信号失真\n• 采用直通引脚排列来简化 PCB 布线\n• –40°C 至 125°C 工作温度范围\n• 2000V 人体放电模型（A114-B，II 类）\n• 1000V 充电器件模型 (C101);

TI

德州仪器

4-Bit Bi-Directional Level Translator Open-Drain and Push-Pull Applications

The LSF0204 is a 4-channel bidirectional multi-voltage level translator for open-drain and push-pull applications. This device is a universal level translator with A port operating from 0.8V to 4.5V (Vref_A) and B port from 1.8V to 5.5V (Vref_B). This range allows for bidirectional voltage translati

Diodes

美台半导体

LSF0204x 4-Bits Bidirectional Multi-Voltage Level Translator for Open-Drain and Push-Pull Application

1 Features • Provides bidirectional voltage translation with no direction terminal • Supports up to 100-MHz up translation and greater than 100-MHz down translation at ≤ 30-pF capacitor load and up to 40-MHz up/ down translation at 50-pF capacitor load • Supports Ioff, partial power-down mo

文件：2.48097 Mbytes 页数：39 Pages

TI

德州仪器

LSF0204x 4-Bits Bidirectional Multi-Voltage Level Translator for Open-Drain and Push-Pull Application

1 Features • Provides bidirectional voltage translation with no direction terminal • Supports up to 100-MHz up translation and greater than 100-MHz down translation at ≤ 30-pF capacitor load and up to 40-MHz up/ down translation at 50-pF capacitor load • Supports Ioff, partial power-down mo

文件：2.48097 Mbytes 页数：39 Pages

TI

德州仪器

丝印：LSF204D；Package：TSSOP(PW)；LSF0204x 4-Bits Bidirectional Multi-Voltage Level Translator for Open-Drain and Push-Pull Application

1 Features • Provides bidirectional voltage translation with no direction terminal • Supports up to 100-MHz up translation and greater than 100-MHz down translation at ≤ 30-pF capacitor load and up to 40-MHz up/ down translation at 50-pF capacitor load • Supports Ioff, partial power-down mo

文件：2.48097 Mbytes 页数：39 Pages

TI

德州仪器