LSF010x 1/2/8 Channel Auto-Bidirectional Multi-Voltage Level Translator for Open- Drain and Push-Pull Applications

1 Features • Provides bidirectional voltage translation with no direction pin • Supports up to 100-MHz up translation and greater than 100-MHz down translation at ≤ 30 pF cap load and up To 40-MHz up/down translation at 50 pF cap load • Allows bidirectional voltage-level translation betwee

文件：3.17475 Mbytes 页数：53 Pages

TI

德州仪器

LSF010x 1/2/8 Channel Auto-Bidirectional Multi-Voltage Level Translator for Open- Drain and Push-Pull Applications

1 Features • Provides bidirectional voltage translation with no direction pin • Supports up to 100-MHz up translation and greater than 100-MHz down translation at ≤ 30 pF cap load and up To 40-MHz up/down translation at 50 pF cap load • Allows bidirectional voltage-level translation betwee

文件：3.52881 Mbytes 页数：57 Pages

TI

德州仪器

LSF0102 2 Channel Auto-Bidirectional Multi-Voltage Level Translator for Open-Drain and Push-Pull Applications

1 Features • Provides bidirectional voltage translation with no direction pin • Supports up to 100MHz up translation and greater than 100MHz down translation at ≤ 30pF capacitive load and up To 40MHz up or down translation at 50pF capacitive load • Allows bidirectional voltage-level transla

文件：2.03985 Mbytes 页数：42 Pages

TI

德州仪器

LSF0102-Q1 Automotive 2-Channel Auto Bidirectional Multi-Voltage Level Translator

1 Features • AEC-Q100 qualified for automotive applications – Temperature grade 1: –40°C ≤ TA ≤ 125°C – Device HBM ESD Classification Level 2 – CDM ESD Classification Level C6 • Provides bidirectional voltage translation with no direction Pin • Supports open drain and push-pull applications

文件：1.03975 Mbytes 页数：27 Pages

TI

德州仪器

LSF0102 2 Channel Auto-Bidirectional Multi-Voltage Level Translator for Open-Drain and Push-Pull Applications

1 Features • Provides bidirectional voltage translation with no direction pin • Supports up to 100MHz up translation and greater than 100MHz down translation at ≤ 30pF capacitive load and up To 40MHz up or down translation at 50pF capacitive load • Allows bidirectional voltage-level transla

文件：2.00903 Mbytes 页数：42 Pages

TI

德州仪器

2-bit bidirectional multi-voltage level translator; open-drain; push-pull

1. General description The LSF0102 is a 2 channel bidirectional multi-voltage level translator for open-drain and push-pull applications. It supports up to 100 MHz up translation and ≥100 MHz down translation at ≤ 30 pF capacitive load. There is no need for a direction pin which minimizes syste

文件：240.26 Kbytes 页数：15 Pages

NEXPERIA

安世

Automotive 2-Channel Auto Bidirectional Multi-Voltage Level Translator

文件：405.79 Kbytes 页数：18 Pages

TI

德州仪器

Channel Bidirectional Multi-Voltage Level Translator

文件：1.73251 Mbytes 页数：39 Pages

TI

德州仪器

2-Bits Bidirectional Level Translator, Open-Drain and Push-Pull Applications

The LSF0102 is a 2-channel bidirectional multi-voltage level translator for open-drain and push-pull applications. This device is a universal level translator that A port operates from 0.65V to 4.5V (Vref_A) and B port 1.8V to 5.5V (Vref_B). This range allows for bidirectional voltage translations b

Diodes

美台半导体

双路双向多电压电平转换器

LSF 系列器件支持双向电压转换，而且无需使用 DIR 引脚，最大限度降低了系统工作量（PMBus、I2C、SMBus 等）。LSF 系列器件在容性负载 ≤ 30pF 时最高支持 100MHz 的升压转换和 100MHz 以上的降压转换；在容性负载为 50pF 时最高支持 40MHz 的升压/降压转换，因此可支持更多的消费类或电信接口（MDIO 或 SDIO）。\n\nLSF 系列的 IO 端口能够耐受 5V 电压，因此与工业和电信应用中的 TTL 电平兼容。LSF 系列极具灵活性，能够为每条通道设置不同电压转换电平。 • 在无方向引脚的情况下提供双向电压转换\n• 可实现以下电压之间的双向电压电平转换 \n• 1.2V ↔ 1.8/2.5/3.3/5V\n• 2.5V ↔ 3.3/5V\n• 低待机电流\n• 低 RON 可提供较少的信号失真\n• 采用直通引脚以简化 PCB 布线\n• -40°C 至 125°C 工作温度范围;

TI

德州仪器