3.3-V 10Base-T/100Base-TX Integrated PHYceiver

General The ICS1893CY-10 is a low-power, physical-layer device (PHY) that supports the ISO/IEC 10Base-T and 100Base-TX Carrier-Sense Multiple Access/Collision Detection (CSMA/CD) Ethernet standards. The ICS1893CY-10 supports managed or unmanaged node, repeater, and switch applications. Features

文件：1.12164 Mbytes 页数：143 Pages

ICST

3.3-V 10Base-T/100Base-TX Integrated PHYceiver

General The ICS1893CY-10 is a low-power, physical-layer device (PHY) that supports the ISO/IEC 10Base-T and 100Base-TX Carrier-Sense Multiple Access/Collision Detection (CSMA/CD) Ethernet standards. The ICS1893CY-10 supports managed or unmanaged node, repeater, and switch applications. Features

文件：1.12164 Mbytes 页数：143 Pages

ICST

3.3V 10Base-T/100Base-TX Integrated PHYceiverTM

General The ICS1893AF is a lower cost, re-packaged version of the ICS1893Y-10. The ICS1893AF is a fully integrated, Physical Layer device (PHY) that is compliant with both the 10Base-T and 100Base-TX CSMA/CD Ethernet Standard, ISO/IEC 8802-3. The ICS1893AF uses the same proven silicon as the ICS1

文件：170.22 Kbytes 页数：12 Pages

ICST

3.3-V 10Base-T/100Base-TX Integrated PHYceiver?

General The ICS1893 is a low-power, physical-layer device (PHY) that supports the ISO/IEC 10Base-T and 100Base-TX Carrier-Sense Multiple Access/Collision Detection (CSMA/CD) Ethernet standards. The ICS1893 architecture is based on the ICS1892. The ICS1893 supports managed or unmanaged node, repea

文件：983.88 Kbytes 页数：152 Pages

ICST

3.3-V 10Base-T/100Base-TX Integrated PHYceiverä

Features • Supports category 5 cables with attenuation in excess of 24 dB at 100 MHz across a temperature range from -5° to +85° C • DSP-based baseline wander correction to virtually eliminate killer packets across temperature range of from -5° to +85° C • Low-power, 0.35-micron CMOS (typic

文件：1.25087 Mbytes 页数：153 Pages

RENESAS

瑞萨

10BASE-T/100BASE-TX INTEGRATED PHYCEIVER WITH RMII INTERFACE

Features • Supports category 5 cables and above with attenuation in excess of 24dB at 100 MHz. • Single-chip, fully integrated PHY provides PCS, PMA, PMD, and AUTONEG sub layers functions of IEEE standard. • 10Base-T and 100Base-TX ISO/IEC 8802.3 compliant • MIIM (MDC/MDIO) management bus fo

文件：513.21 Kbytes 页数：51 Pages

RENESAS

瑞萨

10BASE-T/100BASE-TX INTEGRATED PHYCEIVER WITH RMII INTERFACE

Features • Supports category 5 cables and above with attenuation in excess of 24dB at 100 MHz. • Single-chip, fully integrated PHY provides PCS, PMA, PMD, and AUTONEG sub layers functions of IEEE standard. • 10Base-T and 100Base-TX ISO/IEC 8802.3 compliant • MIIM (MDC/MDIO) management bus f

文件：554.76 Kbytes 页数：39 Pages

RENESAS

瑞萨

10BASE-T/100BASE-TX INTEGRATED PHYCEIVER WITH MII INTERFACE

Description The ICS1894-34 is a low-power, physical-layer device (PHY) that supports the ISO/IEC 10Base-T and 100Base-TX Carrier-Sense Multiple Access/Collision Detection (CSMA/CD) Ethernet standards, ISO/IEC 8802.3. It is intended for MII Node applications and includes the Auto-MDIX feature

文件：567.99 Kbytes 页数：49 Pages

RENESAS

瑞萨

10BASE-T/100BASE-TX INTEGRATED PHYCEIVER WITH RMII INTERFACE

Features • Supports category 5 cables and above with attenuation in excess of 24dB at 100 MHz. • Single-chip, fully integrated PHY provides PCS, PMA, PMD, and AUTONEG sub layers functions of IEEE standard. • 10Base-T and 100Base-TX IEEE 8802.3 compliant • MIIM (MDC/MDIO) management bus for

文件：575.34 Kbytes 页数：54 Pages

RENESAS

瑞萨

10BASE-T/100BASE-TX INTEGRATED PHYCEIVER WITH RMII INTERFACE

Features • Supports category 5 cables and above with attenuation in excess of 24dB at 100 MHz. • Single-chip, fully integrated PHY provides PCS, PMA, PMD, and AUTONEG sub layers functions of IEEE standard. • 10Base-T and 100Base-TX IEEE 8802.3 compliant • MIIM (MDC/MDIO) management bus for

文件：505.81 Kbytes 页数：39 Pages

RENESAS

瑞萨