High Voltage EL Lamp Driver

General Description The Supertex HV833 is a high voltage driver designed for driving EL lamps of up to 35nF (10-12in2). The input supply voltage range is from 1.8V to 6.5V. The device uses a single inductor and a minimum number of passive components. The nominal regulated output voltage that is a

文件：501.07 Kbytes 页数：9 Pages

SUTEX

EL Lamp Driver

Introduction The Supertex HV833DB1 demo board contains all necessary circuitry to demonstrate the features of the HV833 EL lamp driver. Simply connect it to a power supply and a lamp as shown below. For additional assistance in designing EL driver circuits, please refer to application notes AN-H

文件：38.21 Kbytes 页数：2 Pages

SUTEX

High Voltage EL Lamp Driver

General Description The Supertex HV833 is a high voltage driver designed for driving EL lamps of up to 35nF (10-12in2). The input supply voltage range is from 1.8V to 6.5V. The device uses a single inductor and a minimum number of passive components. The nominal regulated output voltage that is a

文件：501.07 Kbytes 页数：9 Pages

SUTEX

High Voltage EL Lamp Driver

General Description The Supertex HV833 is a high voltage driver designed for driving EL lamps of up to 35nF (10-12in2). The input supply voltage range is from 1.8V to 6.5V. The device uses a single inductor and a minimum number of passive components. The nominal regulated output voltage that is a

文件：501.07 Kbytes 页数：9 Pages

SUTEX

Low Noise Dual EL Lamp Driver

General Description The Supertex HV835 is a high voltage driver designed for driving two EL lamps with a combined area of 3.5 square inches. The input supply voltage range is from 2.0V to 5.8V. The device is designed to reduce the amount of audible noise emitted by the lamp. This device uses a si

文件：242.95 Kbytes 页数：6 Pages

SUTEX

Low Noise Dual EL Lamp Driver

General Description The Supertex HV835 is a high voltage driver designed for driving two EL lamps with a combined area of 3.5 square inches. The input supply voltage range is from 2.0V to 5.8V. The device is designed to reduce the amount of audible noise emitted by the lamp. This device uses a si

文件：242.95 Kbytes 页数：6 Pages

SUTEX

High Voltage Dual EL Lamp Driver

General Description The Supertex HV839 is a high voltage driver designed for driving two EL lamps with a combined area of 3.5in2. The input supply voltage range is from 2.0 to 5.8V. The device is designed to reduce the amount of audible noise emitted by the lamp. This device uses a single induc

文件：352.87 Kbytes 页数：9 Pages

SUTEX

High Voltage Dual EL Lamp Driver

General Description The Supertex HV839 is a high voltage driver designed for driving two EL lamps with a combined area of 3.5in2. The input supply voltage range is from 2.0 to 5.8V. The device is designed to reduce the amount of audible noise emitted by the lamp. This device uses a single induc

文件：352.87 Kbytes 页数：9 Pages

SUTEX

High Voltage Dual EL Lamp Driver

General Description The Supertex HV839 is a high voltage driver designed for driving two EL lamps with a combined area of 3.5in2. The input supply voltage range is from 2.0 to 5.8V. The device is designed to reduce the amount of audible noise emitted by the lamp. This device uses a single induc

文件：352.87 Kbytes 页数：9 Pages

SUTEX

High Voltage Low Noise Inductorless EL Lamp Driver

General Description Supertex HV850 is a high voltage electroluminescent (EL) Lamp Driver IC. It is designed to drive EL lamps of up to 2.0in2, with capacitive values up to 4.5nF. HV850 converts a low voltage DC input to a high voltage AC output across an EL lamp. It uses a charge pump scheme to b

文件：248.73 Kbytes 页数：6 Pages

SUTEX