High Voltage EL Lamp Driver

General Description The Supertex HV829A/B are high voltage EL lamp driver integrated circuits designed for driving EL lamps of up to 70nF at 1000Hz. The input supply voltage range is from 2.7V to 5.5V. These devices use a single inductor, a high voltage switching FET and a minimum number of passi

文件：42.63 Kbytes 页数：4 Pages

SUTEX

High Voltage EL Lamp Driver

General Description The Supertex HV830 is a high-voltage driver designed for driving EL lamps of up to 50nF. EL lamps greater than 50nF can be driven for applications not requiring high brightness. The input supply voltage range is from 2.0V to 9.5V. The device uses a single inductor and a minimu

文件：306.87 Kbytes 页数：4 Pages

SUTEX

High Voltage EL Lamp Driver

General Description The Supertex HV830 is a high-voltage driver designed for driving EL lamps of up to 50nF. EL lamps greater than 50nF can be driven for applications not requiring high brightness. The input supply voltage range is from 2.0V to 9.5V. The device uses a single inductor and a minimu

文件：306.87 Kbytes 页数：4 Pages

SUTEX

High Voltage EL Lamp Driver

General Description The Supertex HV830 is a high-voltage driver designed for driving EL lamps of up to 50nF. EL lamps greater than 50nF can be driven for applications not requiring high brightness. The input supply voltage range is from 2.0V to 9.5V. The device uses a single inductor and a minimu

文件：306.87 Kbytes 页数：4 Pages

SUTEX

High Voltage Dual EL Lamp Driver

General Description The Supertex HV831 is a high voltage driver designed for driving two EL lamps with a combined area of 3.5 square inches. The input supply voltage range is from 2.0V to 5.0V. The device is designed to reduce the amount of audible noise emitted by the lamp. This device uses a si

文件：529.6 Kbytes 页数：8 Pages

SUTEX

High Voltage Dual EL Lamp Driver

General Description The Supertex HV831 is a high voltage driver designed for driving two EL lamps with a combined area of 3.5 square inches. The input supply voltage range is from 2.0V to 5.0V. The device is designed to reduce the amount of audible noise emitted by the lamp. This device uses a si

文件：529.6 Kbytes 页数：8 Pages

SUTEX

Dual High Voltage, Low Noise EL Lamp Driver

General Description The Supertex HV832 is a high voltage driver designed for driving two EL lamps with a combined area of 3.5 square inches. The input supply voltage range is from 2.0V to 5.0V. The device is designed to reduce the amount of audible noise emitted by the lamp. The device uses a sin

文件：48.88 Kbytes 页数：6 Pages

SUTEX

Dual EL Lamp Driver

Introduction The Supertex HV832DB1 demo board contains all necessary circuitry to demonstrate the features of the HV832 dual EL lamp driver. Simply connect it to a power supply and a lamp as shown below. For additional assistance in designing EL driver circuits, please refer to application notes

文件：445.67 Kbytes 页数：2 Pages

SUTEX

Dual High Voltage, Low Noise EL Lamp Driver

General Description The Supertex HV832 is a high voltage driver designed for driving two EL lamps with a combined area of 3.5 square inches. The input supply voltage range is from 2.0V to 5.0V. The device is designed to reduce the amount of audible noise emitted by the lamp. The device uses a sin

文件：48.88 Kbytes 页数：6 Pages

SUTEX

Dual High Voltage, Low Noise EL Lamp Driver

General Description The Supertex HV832 is a high voltage driver designed for driving two EL lamps with a combined area of 3.5 square inches. The input supply voltage range is from 2.0V to 5.0V. The device is designed to reduce the amount of audible noise emitted by the lamp. The device uses a sin

文件：48.88 Kbytes 页数：6 Pages

SUTEX