Analog Switch

The ET3148 advanced load management switches target applications requiring a highly integrated solution it disconnects loads powered from DC Power Rail (<6V) with stringent off-state current targets and high load capacitances (up to 200μF). Each switch consists of slew-rate controlled low-impedance • 1.5V to 5.5V Input Voltage Operating Range\r\n• Typical RDS(ON):\r\n21mΩ at VIN=5.5V\r\n23mΩ at VIN=4.5V\r\n41mΩ at VIN=1.8V\r\n90mΩ at VIN=1.5V\r\n• Slew Rate/Inrush Control with tR:2.7ms (Typ)\r\n• 3A Maximum Continuous Current Capability\r\n• Low<1μA Off Switch Current\r\n• True Reverse Current;

ETEK

力芯微

3A Switch with TRCB

The ET3148A advanced load management switches target applications requiring a highly integrated solution it disconnects loads powered from DC Power Rail (The ET3148A has True Reverse Current Blocking (TRCB) function blocking unwanted reverse current from VOUT to VIN during ON/OFF state. These device • 1.5V to 6.0V Input Voltage Operating Range\n\n• Typical RDS(ON):\n-- 21mΩat VIN=5.5V\n-- 23mΩat VIN=4.5V\n-- 30mΩat VIN=2.5V\n\n• Slew Rate/Inrush Control with tR: 2.7ms (Typ)\n\n• 3A Maximum Continuous Current Capability\n\n• LowTrue Reverse Current Blocking (TRCB)\n\n• ESD Protected: Above 8kV H;

ETEK

力芯微

Providing high-performance solutions for every link in the signal chain

文件：9.95425 Mbytes 页数：44 Pages

INTERSIL

Military Standard Connector Index

The following is a listing of circular connectors defined by US Military Specifications, cross-referenced to the applicable active or inactive part number series. The symbols in the Connector Designator column are an essential element in Glenair’s backshell part number developments.

文件：59.97 Kbytes 页数：1 Pages

GLENAIR

Power MOSFET 20 V, 3.5 A, Dual N-Channel, TSOP-6

文件：82.42 Kbytes 页数：5 Pages

ONSEMI

安森美半导体