High Ripple Snap Mount Capacitors

文件：1.26514 Mbytes 页数：32 Pages

CHEMI-CON

High Ripple Snap Mount Capacitors

文件：1.26514 Mbytes 页数：32 Pages

CHEMI-CON

High Ripple Snap Mount Capacitors

文件：1.26514 Mbytes 页数：32 Pages

CHEMI-CON

DUAL CONTROL HEPTODE

文件：342.75 Kbytes 页数：13 Pages

PHI

PHI

丝印：E91T；Package：SOT23-5；Low Noise, 1.8V, 3.3MHz, RRIO, Zero Drift Op-amps

文件：1.12311 Mbytes 页数：15 Pages

3PEAK

思瑞浦

丝印：E91U；Package：SOT23-5；Low Noise, 1.8V, 3.3MHz, RRIO, Zero Drift Op-amps

文件：1.12311 Mbytes 页数：15 Pages

3PEAK

思瑞浦

Stepper Motor 8 x Low Side Driver

The IC is developed for automotive applications and can also be used in several other application areas. The IC is well suited to drive relays, lamps, bus systems etc. with medium power consumption.\n\n The device provides a... read more • Supply voltage range VDD 4.5V to 5.5V\n • Low standby current (typ. < 1μA)\n • SPI compatible interface to μC\n • Addressing modes: daisy chain and chip select\n • Output status detection\n • 8 high current outputs (RON typ. 1.5Ω / Imax = 350mA)\n • Wide output operating voltage range (5.5 to 25.5;

Elmos

艾尔默斯

K-Bus transceiver

DESCRIPTION\nThe IC is designed for communication via bidirectional serial data channels. In addition to the level conversion of transmit and receive signals from the micro processor’s voltage level to the 12V bus level, the device includes plausibility checks in order to guarantee undisturbed bus c  Supply voltage range VS 6.9V to 19V\n Supply voltage range VDD 4.5V to 5.5V\n Data rate up to 9.600 Baud\n Bus-line input voltage range from – 24V to + 30V (+40V for t < 0.5s)\n Internal monitoring of prohibited conditions\n Output slewrate control to reduce EMI\n Very low standby current (30µA typ;

Elmos

艾尔默斯

LIN- / K-Bus transceiver

DESCRIPTION\nThe IC is designed to control bidirectional serial data transmission on bus lines. It supports both LIN- and K-Bus which are selected by the MODE pin. This feature allows an easy migration from K- to LIN-bus without changing the transceiver. The high voltage range and the low standby cu Supply voltage range VS 6V to 18V\nLogic supply voltage range VDD 4.5V to 5.5V\nData rate up to 20kBaud for LIN-mode\nData rate up to 9.600Baud for K-mode\nChange between LIN-mode and K-mode with external pin\nInternal monitoring features\nOutput driver with slewrate control (EMI)\nVery low standby ;

Elmos

艾尔默斯

包装：托盘 类别：连接器，互连器件 插拔式连接器组件 描述：CONN SATA RCPT 22POS SLD R/A SMD

Pulse Electronics Network