E910.15中文资料LIN- / K-Bus transceiver数据手册Elmos规格书

描述 Description

DESCRIPTION
The IC is designed to control bidirectional serial data transmission on bus lines. It supports both LIN- and K-Bus which are selected by the MODE pin. This feature allows an easy migration from K- to LIN-bus without changing the transceiver. The high voltage range and the low standby current as well as the wide temperature range make the IC interesting for a wide field of applications.FEATURES
Supply voltage range VS 6V to 18V
Logic supply voltage range VDD 4.5V to 5.5V
Data rate up to 20kBaud for LIN-mode
Data rate up to 9.600Baud for K-mode
Change between LIN-mode and K-mode with external pin
Internal monitoring features
Output driver with slewrate control (EMI)
Very low standby current (15µA typical)
Bus input voltage excursion from
– 24V to + 30V (independent of VS)
Over temperature protection
Applicable as diagnostic interface to ISO 9141 and OBD II
Load-dump and jump-start protected
– 40°C to + 125°C operating temperature
SO8n and SO14n packageAPPLICATION
Automotive bus systems
Body electronics
Comfort electronics

特性 Features

Supply voltage range VS 6V to 18V
Logic supply voltage range VDD 4.5V to 5.5V
Data rate up to 20kBaud for LIN-mode
Data rate up to 9.600Baud for K-mode
Change between LIN-mode and K-mode with external pin
Internal monitoring features
Output driver with slewrate control (EMI)
Very low standby current (15µA typical)
Bus input voltage excursion from
– 24V to + 30V (independent of VS)
Over temperature protection
Applicable as diagnostic interface to ISO 9141 and OBD II
Load-dump and jump-start protected
– 40°C to + 125°C operating temperature
SO8n and SO14n packageAPPLICATION
Automotive bus systems
Body electronics
Comfort electronics