Single-Channel 1-Wire Master with Sleep Mode

General Description The DS2482-101 is an I2C-to-1-Wire® bridge device that interfaces directly to standard (100kHz max) or fast (400kHz max) I2C masters to perform bidirectional protocol conversion between the I2C master and any downstream 1-Wire slave devices. Relative to anyattached 1-Wire slav

文件：354.05 Kbytes 页数：24 Pages

Maxim

美信

Single-Channel 1-Wire Master with Adjustable Timing and Sleep Mode

General Description The DS2483 is an I2C-to-1-WireM bridge device that interfaces directly to standard (100kHz max) or fast (400kHz max) I2C masters to perform protocol con version between the I2C master and any downstream 1-Wire slave devices. Relative to any attached 1-Wire slave device, the DS

文件：3.19001 Mbytes 页数：29 Pages

Maxim

美信

USB to 1-Wire Bridge Chip

DESCRIPTION The DS2490 is a bridge chip that enables communication between a USB host system and a 1-Wire bus. It provides regular, overdrive, and flexible 1-Wire communication speeds and a full-speed 12Mbps connection to USB. USB vendor-specific commands defined in this specification are used to

文件：1.39255 Mbytes 页数：50 Pages

Maxim

美信

USB to 1-Wire Bridge Chip

DESCRIPTION The DS2490 is a bridge chip that enables communication between the Universal Serial Bus (USB) and a 1-Wire bus. It provides regular, overdrive and flexible 1-Wire communication speeds and a full-speed 12 Mbps connection to USB. USB vendor-specific commands defined in this specificatio

文件：530.95 Kbytes 页数：50 Pages

Dallas

USB to 1-Wire Bridge Chip

DESCRIPTION The DS2490 is a bridge chip that enables communication between the Universal Serial Bus (USB) and a 1-Wire bus. It provides regular, overdrive and flexible 1-Wire communication speeds and a full-speed 12 Mbps connection to USB. USB vendor-specific commands defined in this specificatio

文件：530.95 Kbytes 页数：50 Pages

Dallas

USB to 1-Wire Bridge Chip

DESCRIPTION The DS2490 is a bridge chip that enables communication between a USB host system and a 1-Wire bus. It provides regular, overdrive, and flexible 1-Wire communication speeds and a full-speed 12Mbps connection to USB. USB vendor-specific commands defined in this specification are used to

文件：1.39255 Mbytes 页数：50 Pages

Maxim

美信

USB to 1-Wire Bridge Chip

DESCRIPTION The DS2490 is a bridge chip that enables communication between a USB host system and a 1-Wire bus. It provides regular, overdrive, and flexible 1-Wire communication speeds and a full-speed 12Mbps connection to USB. USB vendor-specific commands defined in this specification are used to

文件：1.39255 Mbytes 页数：50 Pages

Maxim

美信

4Kb 1-Wire EEPROM with 200k Write/Erase Cycles

General Description  The DS24B33 is a 4096-bit, 1-Wire® EEPROM organized as 16 memory pages of 256 bits each. Data is written to a 32-byte scratchpad, verified, and then copied to the EEPROM memory. The DS24B33 communicates over a single-conductor 1-Wire bus. The communication follows the standar

文件：243.63 Kbytes 页数：22 Pages

Maxim

美信

4Kb 1-Wire EEPROM with 200k Write/Erase Cycles

General Description  The DS24B33 is a 4096-bit, 1-Wire® EEPROM organized as 16 memory pages of 256 bits each. Data is written to a 32-byte scratchpad, verified, and then copied to the EEPROM memory. The DS24B33 communicates over a single-conductor 1-Wire bus. The communication follows the standar

文件：243.63 Kbytes 页数：22 Pages

Maxim

美信

4Kb 1-Wire EEPROM with 200k Write/Erase Cycles

General Description  The DS24B33 is a 4096-bit, 1-Wire® EEPROM organized as 16 memory pages of 256 bits each. Data is written to a 32-byte scratchpad, verified, and then copied to the EEPROM memory. The DS24B33 communicates over a single-conductor 1-Wire bus. The communication follows the standar

文件：243.63 Kbytes 页数：22 Pages

Maxim

美信