具有电流调节功能的 1.65V 至 11V、2.5A、双 H 桥电机驱动器

The DRV8410 is a dual H-bridge motor driver that can drive one or two DC brush motors, one stepper motor, solenoids, or other inductive loads. The tripler charge pump allows the device to operate down to 1.65 V to accommodate 1.8-V supply rails and low-battery conditions. The charge pump integrates • Dual H-bridge motor driver, can drive - \n• One or two brushed DC motors\n• Low ON-resistance: HS + LS = 800 mΩ (Typical, 25°C)\n• 1.65 to 11 V\n• Pin-to-pin compatible with - \n• DRV8833C: 1735-mΩ/bridge\n• DRV8411: 400-mΩ/bridge\n• High output current capability: 2.5-A Peak\n• Supports 1.8-V,;

TI

德州仪器

DRV8410 Dual H-Bridge Motor Driver with Current Regulation

1 Features • Dual H-bridge motor driver, can drive - – One bipolar stepper motor – One or two brushed DC motors – Solenoids and other inductive loads • Low ON-resistance: HS + LS = 800 mΩ (Typical, 25°C) • Wide Power Supply Voltage Range – 1.65 to 11 V • Pin-to-pin compatible with - – DR

文件：2.94295 Mbytes 页数：54 Pages

TI

德州仪器

DRV8410 Dual H-Bridge Motor Driver with Current Regulation

1 Features • Dual H-bridge motor driver, can drive - – One bipolar stepper motor – One or two brushed DC motors – Solenoids and other inductive loads • Low ON-resistance: HS + LS = 800 mΩ (Typical, 25°C) • Wide Power Supply Voltage Range – 1.65 to 11 V • Pin-to-pin compatible with - – DR

文件：2.7716 Mbytes 页数：61 Pages

TI

德州仪器

丝印：8410；Package：HTSSOP；DRV8410 Dual H-Bridge Motor Driver with Current Regulation

1 Features • Dual H-bridge motor driver, can drive - – One bipolar stepper motor – One or two brushed DC motors – Solenoids and other inductive loads • Low ON-resistance: HS + LS = 800 mΩ (Typical, 25°C) • Wide Power Supply Voltage Range – 1.65 to 11 V • Pin-to-pin compatible with - – DR

文件：2.7716 Mbytes 页数：61 Pages

TI

德州仪器

丝印：8410；Package：WQFN；DRV8410 Dual H-Bridge Motor Driver with Current Regulation

1 Features • Dual H-bridge motor driver, can drive - – One bipolar stepper motor – One or two brushed DC motors – Solenoids and other inductive loads • Low ON-resistance: HS + LS = 800 mΩ (Typical, 25°C) • Wide Power Supply Voltage Range – 1.65 to 11 V • Pin-to-pin compatible with - – DR

文件：2.7716 Mbytes 页数：61 Pages

TI

德州仪器

丝印：8410；Package：WQFN；DRV8410 Dual H-Bridge Motor Driver with Current Regulation

1 Features • Dual H-bridge motor driver, can drive - – One bipolar stepper motor – One or two brushed DC motors – Solenoids and other inductive loads • Low ON-resistance: HS + LS = 800 mΩ (Typical, 25°C) • Wide Power Supply Voltage Range – 1.65 to 11 V • Pin-to-pin compatible with - – DR

文件：2.94295 Mbytes 页数：54 Pages

TI

德州仪器