DRV8410 Dual H-Bridge Motor Driver with Current Regulation

1 Features • Dual H-bridge motor driver, can drive - – One bipolar stepper motor – One or two brushed DC motors – Solenoids and other inductive loads • Low ON-resistance: HS + LS = 800 mΩ (Typical, 25°C) • Wide Power Supply Voltage Range – 1.65 to 11 V • Pin-to-pin compatible with - – DR

文件：2.01884 Mbytes 页数：45 Pages

TI

德州仪器

DRV8411 Dual H-Bridge Motor Driver with Current Regulation

1 Features • Dual H-bridge motor driver, can drive - – One bipolar stepper motor – One or two brushed DC motors – Solenoids and other inductive loads • Low ON-resistance: HS + LS = 400 mΩ (Typical, 25°C) • Wide Power Supply Voltage Range – 1.65 to 11 V • Pin-to-pin compatible with - – DR

文件：2.03405 Mbytes 页数：45 Pages

TI

德州仪器

DRV8411 Dual H-Bridge Motor Driver with Current Regulation

1 Features • Dual H-bridge motor driver, can drive - – One bipolar stepper motor – One or two brushed DC motors – Solenoids and other inductive loads • Low ON-resistance: HS + LS = 400 mΩ (Typical, 25°C) • Wide Power Supply Voltage Range – 1.65 to 11 V • Pin-to-pin compatible with - – DR

文件：2.9544 Mbytes 页数：54 Pages

TI

德州仪器

DRV8410 Dual H-Bridge Motor Driver with Current Regulation

1 Features • Dual H-bridge motor driver, can drive - – One bipolar stepper motor – One or two brushed DC motors – Solenoids and other inductive loads • Low ON-resistance: HS + LS = 800 mΩ (Typical, 25°C) • Wide Power Supply Voltage Range – 1.65 to 11 V • Pin-to-pin compatible with - – DR

文件：2.94295 Mbytes 页数：54 Pages

TI

德州仪器

DRV8410 Dual H-Bridge Motor Driver with Current Regulation

1 Features • Dual H-bridge motor driver, can drive - – One bipolar stepper motor – One or two brushed DC motors – Solenoids and other inductive loads • Low ON-resistance: HS + LS = 800 mΩ (Typical, 25°C) • Wide Power Supply Voltage Range – 1.65 to 11 V • Pin-to-pin compatible with - – DR

文件：2.7716 Mbytes 页数：61 Pages

TI

德州仪器

DRV8411 Dual H-Bridge Motor Driver with Current Regulation

1 Features • Dual H-bridge motor driver, can drive - – One bipolar stepper motor – One or two brushed DC motors – Solenoids and other inductive loads • Low ON-resistance: HS + LS = 400 mΩ (Typical, 25°C) • Wide Power Supply Voltage Range – 1.65 to 11 V • Pin-to-pin compatible with - – DR

文件：3.09928 Mbytes 页数：57 Pages

TI

德州仪器

DRV8411A Dual H-Bridge Motor Driver with Current Regulation

1 Features • Dual H-bridge motor driver, can drive - – One bipolar stepper motor – One or two brushed DC motors – Solenoids and other inductive loads • Low ON-resistance: HS + LS = 400 mΩ (Typical, 25°C) • Wide Power Supply Voltage Range – 1.65 to 11 V • Pin-to-pin compatible with - – DR

文件：2.97118 Mbytes 页数：54 Pages

TI

德州仪器

DRV8411A Dual H-Bridge Motor Driver with Current Regulation

1 Features • Dual H-bridge motor driver, can drive - – One bipolar stepper motor – One or two brushed DC motors – Solenoids and other inductive loads • Low ON-resistance: HS + LS = 400 mΩ (Typical, 25°C) • Wide Power Supply Voltage Range – 1.65 to 11 V • Pin-to-pin compatible with - – DR

文件：2.53544 Mbytes 页数：53 Pages

TI

德州仪器

DRV8421 18V 2A Dual H-Bridge Stepper Driver

1 Features • Dual H-Bridge Motor Driver – Single/Dual Brushed DC – Stepper – Solenoids • 4 to 18V Operating Supply Voltage Range • Low ON-resistance: HS + LS = 900mΩ (Typical, 25°C) • High Output Current per H-Bridge – 2A Maximum Driver Current at 12V and TA = 25°C – Parallel Mode Avail

文件：869.4 Kbytes 页数：25 Pages

TI

德州仪器

DRV8421 18V 2A Dual H-Bridge Stepper Driver

1 Features • Dual H-Bridge Motor Driver – Single/Dual Brushed DC – Stepper – Solenoids • 4 to 18V Operating Supply Voltage Range • Low ON-resistance: HS + LS = 900mΩ (Typical, 25°C) • High Output Current per H-Bridge – 2A Maximum Driver Current at 12V and TA = 25°C – Parallel Mode Avail

文件：873 Kbytes 页数：26 Pages

TI

德州仪器