DFRduino Ethernet Shield

Features:  Support Arduino official Ethernet Library (Arduino IDE 1.0.6).  Add‐on micro‐SD card slot, which can be used to store files and accessed via the SD Library.  Compatible with the Arduino Uno as well as Mega (2560).  The Wiznet W5200 provides a network (IP) stack capable of both T

文件：234.46 Kbytes 页数：4 Pages

DFROBOT

上海智位机器人股份有限公司

RoMeo BLE (SKU:DFR0305)

Features  Auto sensing/switching external power input  Transmission range: 70m in free space  Support bluetooth remote update the Arduino program  Support Bluetooth HID  Support iBeacons  Support AT command to config the BLE  Support Transparent communication through Serial  Supp

文件：490.49 Kbytes 页数：18 Pages

DFROBOT

上海智位机器人股份有限公司

Arduino Shield for Raspberry Pi 2B and 3B SKU:DFR0327

Features  Integrate with the Xbee socket Available to be connected to Arduino or Raspberry Pi B+ directly either Compatible with BLE Link(BT4.0)/Bluetooth Bee(BT2.1) and xbee modules  Embeded DS1307 RTC module,which keeps time of the Pi even when the power is off, or the battery removed 

文件：404.09 Kbytes 页数：8 Pages

DFROBOT

上海智位机器人股份有限公司

Intel Galileo Gen 2 Development Board

FEATURES  Intel® Quark™ SoC X1000 application processor, a 32‐bit, single‐core, single‐thread, Intel® Pentium® processor instruction set architecture (ISA)‐compatible, operating at speeds up to 400 MHz.  Support for a wide range of industry standard I/O interfaces, including a full‐sized min

文件：85.73 Kbytes 页数：2 Pages

DFROBOT

上海智位机器人股份有限公司

Romeo for Intel® Edison Controller (With Intel® Edison)

FEATURES  Dual‐core processor, 500MHz Intel® AtomTM processor and 100MHz Intel® QuarkTM microcontroller  Support USB power and external power supply switch  Support SPI program port  Support 1 x I2C interface  Support 2 way motor drive (Peak Current: 2A)  Support Broadcom 43340 802.11

文件：84.49 Kbytes 页数：2 Pages

DFROBOT

上海智位机器人股份有限公司

Bluno Beetle Shield SKU: DFR0356

Features  4 digital I/O pins: D2-D5  4 analog Input pin: A0-A3  Vin input range: 5-8v  A power switch  Dimensions: 38 x 37 mm/ 1.5 x 1.45 inches  Mounting holes x4 (3mm diameter)

文件：242.27 Kbytes 页数：4 Pages

DFROBOT

上海智位机器人股份有限公司

CAN‐BUS Shield V2 (SKU: DFR0370)

Features  Capable of transmitting and receiving both standard and remote frames  Supports rotational and interrupt detection reception methods  Supports UART, i2C and DB9 terminal interfaces  Supports SD card data storage  Supports Arduino mainboard power supply or DB9 power supply (Swit

文件：623.98 Kbytes 页数：41 Pages

DFROBOT

上海智位机器人股份有限公司

Cookie I/O Expansion Shield V2 SKU: DFR0375

Features  6 x PH2.0-3P interface digital ports: D3, D5, D6, D9, D10, D11  6 x PH2.0-3P Interface analog ports: A0 - A5  Two I2C ports, PH2.0-4P Interface  5V or 3.3V power supply (selected via power jumper cap)  Size: 58 * 52 mm / 2.28 * 2.04 inches

文件：490.93 Kbytes 页数：5 Pages

DFROBOT

上海智位机器人股份有限公司

20W Adjustable DC-DC Buck Converter with Digital Display

FEATURES  Supports self-calibration function to provide high-precision voltage output. (Recommended input voltage is maintained at 4.5V or more)  Touch the button to switch the measurement input or output voltage, and an indicator shows which voltage is being measured.  The display can be d

文件：387.02 Kbytes 页数：2 Pages

DFROBOT

上海智位机器人股份有限公司

Prototyping Shield for Raspberry Pi

FEATURES  A big prototyping area, half of which is 'breadboard' style and half of which is 'perfboard' style so you can wire up DIP chips, sensors, and the like.  Along the edges of the proto area, all the GPIO/I2C/SPI and power pins are broken out to 0.1 stips so you can easily connect to t

文件：128.96 Kbytes 页数：3 Pages

DFROBOT

上海智位机器人股份有限公司