CC2652R7中文资料具有 704kB 闪存的 SimpleLink™ Arm© Cortex©-M4F 多协议 2.4GHz 无线 MCU数据手册TI规格书

描述 Description

The SimpleLink™CC2652R7 device is a multiprotocol 2.4 GHz wireless microcontroller (MCU) supporting Thread,Zigbee , Bluetooth 5.2 Low Energy, IEEE 802.15.4, IPv6-enabled smart objects (6LoWPAN), proprietary systems, including the TI 15.4-Stack (2.4 GHz), and concurrent multiprotocol through a Dynamic Multiprotocol Manager (DMM) driver. The device is optimized for low-power wireless communication and advanced sensing in building security systems, HVAC, medical, wired networking, portable electronics, home theater & entertainment, and connected peripherals markets. The highlighted features of this device include:Wide flexibility of protocol stack support in the SimpleLink™ CC13x2 and CC26x2 Software Development Kit (SDK). Memory scalable portfolio from 32KB to 704KB Flash enabling ease of platform migration. Longer battery life wireless applications with low standby current of 1.15 µA with full RAM retention. Advanced sensing with a programmable, autonomous ultra-low power Sensor Controller CPU with fast wake-up capability. As an example, the sensor controller is capable of 1-Hz ADC sampling at 1 µA system current. Low SER (Soft Error Rate) FIT (Failure-in-time) for long operation lifetime with no disruption for industrial markets with always-on SRAM parity against corruption due to potential radiation events. Dedicated software controlled radio controller (Arm® Cortex®-M0) providing flexible low-power RF transceiver capability to support multiple physical layers and RF standards. Excellent radio sensitivity and robustness (selectivity and blocking) performance for Bluetooth ® Low Energy (-104 dBm for 125-kbps LE Coded PHY).

The CC2652R7 device is part of the SimpleLink™ MCU platform, which consists of Wi-Fi, Bluetooth Low Energy, Thread, Zigbee, Sub-1 GHz MCUs, and host MCUs that all share a common, easy-to-use development environment with a single core software development kit (SDK) and rich tool set. A one-time integration of the SimpleLink™ platform enables you to add any combination of the portfolio’s devices into your design, allowing 100 percent code reuse when your design requirements change. For more information, visit SimpleLink™ MCU platform.

特性 Features

• Microcontroller
• EEMBC CoreMark score: 148
• 256KB of ROM for protocols and library functions
• 144KB of ultra-low leakage SRAM. The SRAM is protected by parity to ensure high reliability of operation.
• Supports over-the-air upgrade (OTA)
• Ultra-low power sensor controller with 4KB of SRAM
• Operation independent from system CPU
• TI-RTOS, drivers, bootloader, Bluetooth 5.2 Low Energy controller, and IEEE 802.15.4 MAC in ROM for optimized application size
• 7-mm × 7-mm RGZ VQFN48 (31 GPIOs)
• Peripherals
• Four 32-bit or eight 16-bit general-purpose timers
• Two comparators with internal reference DAC (one continuous time, one ultra-low power)
• Two UART
• I2C
• Real-time clock (RTC)
• ECC and RSA public key hardware Accelerator
• True random number generator (TRNG)
• Integrated temperature and battery monitor
• External system
• Low power
• Active mode RX: 7.1 mA
• Active mode TX 5 dBm: 9.9 mA
• Sensor controller, low-power mode, 2 MHz, running infinite loop: 30.1 µA
• Standby: 1.15 µA (RTC on, 144KB RAM and CPU retention)
• Radio section
• Excellent receiver sensitivity:-100 dBm for 802.15.4 (2.4 GHz), -104 dBm for Bluetooth 125-kbps (LE Coded PHY)
• Suitable for systems targeting compliance with worldwide radio frequency regulations
• EN 300 440 Category 2
• ARIB STD-T66 (Japan)
• Wireless protocols
• Development Tools and Software
• SimpleLink™ CC13x2 and CC26x2 Software Development Kit (SDK)
• Sensor Controller Studio for building low-power sensing applications