CC2652P7中文资料SimpleLink™ Arm® Cortex®-M4F multiprotocol 2.4-GHz wireless MCU, 704-kB Flash, integrated power amp数据手册TI规格书

描述 Description

The SimpleLink™ CC2652P7 device is a multiprotocol 2.4-GHz wireless microcontroller (MCU) supporting Thread,Zigbee , Matter, Bluetooth5.2 Low Energy, IEEE 802.15.4g, IPv6-enabled smart objects (6LoWPAN), TI 15.4-Stack (2.4 GHz), and concurrent multiprotocol through a Dynamic Multiprotocol Manager (DMM) driver. The CC2652P7 is based on an Arm® Cortex® M4F main processor and optimized for low-power wireless communication and advanced sensing in grid infrastructure, building automation, retail automation, personal electronics and medical applications.

The CC2652P7 has a software defined radio powered by an Arm® Cortex® M0, which allows support for multiple physical layers and RF standards. The device supports operation in the 2360 to 2500-MHz frequency band. PHY and frequency switching can be done runtime through a dynamic multiprotocol manager (DMM) driver. The CC2652P7 has an efficient built-in PA that supports +10 dBm TX at 21 mA and +20 dBM TX at 101 mA in 2.4-GHz band. CC2652P7 has a receive sensitivity of -104 dBm for 125-kbps Bluetooth® Low Energy Coded PHY.

The CC2652P7 has a low sleep current of 0.9 µA with RTC and 144KB RAM retention. In addition to the main Cortex® M4F processor, the device also has an autonomous ultra-low power Sensor Controller CPU with fast wake-up capability. As an example, the sensor controller is capable of 1-Hz ADC sampling at 1-µA system current.

The CC2652P7 has Low SER (Soft Error Rate) FIT (Failure-in-time) for long operational lifetime. Always-on SRAM parity minimizes risk for corruption due to potential radiation events. Consistent with many customers’ 10 to 15 years or longer life cycle requirements, TI has a product life cycle policy with a commitment to product longevity and continuity of supply.

The CC2652P7 device is part of the SimpleLink™ MCU platform, which consists of Wi-Fi®, Bluetooth® Low Energy, Thread, Zigbee, Wi-SUN®, Amazon Sidewalk, mioty®, Sub-1 GHz MCUs, and host MCUs. CC2652P7 is part of a scalable portfolio with flash sizes from 32KB to 704KB with pin-to-pin compatible package options. The common SimpleLink™CC13xx and CC26xx Software Development Kit (SDK) and SysConfig system configuration tool supports migration between devices in the portfolio. A comprehensive number of software stacks, application examples and SimpleLink™ Academy training sessions are included in the SDK. For more information, visit wireless connectivity.

特性 Features

Wireless microcontroller
• 704KB flash program memory
• 8KB of cache SRAM
• Dynamic multiprotocol manager (DMM) driver
• Supports over-the-air upgrade (OTA)
• Autonomous MCU with 4KB of SRAM
• Fast wake-up for low-power operation
• MCU consumption:
• 65 µA/MHz running CoreMark
• 0.1 µA shutdown mode, wake-up on pin
• Ultra low-power sensor controller consumption:
• 799 µA in 24 MHz mode
• Radio Consumption:
• 21 mA TX at +10 dBm
• Thread, Zigbee®, Matter
• SimpleLink™ TI 15.4-stack
• Proprietary systems
• -104 dBm for Bluetooth® Low Energy 125-kbps
• Suitable for systems targeting compliance with these standards:
• FCC CFR47 Part 15
• Digital peripherals can be routed to any GPIO
• 12-bit ADC, 200 kSamples/s, 8 channels
• Two comparators
• Two UART, two SSI, I2C, I2S
• Integrated temperature and battery monitor
• AES 128- and 256-bit cryptographic accelerator
• SHA2 Accelerator (full suite up to SHA-512)
• LP-CC1352P7 Development Kits
• SmartRF™ Studio for simple radio configuration
• SysConfig system configuration tool
• On-chip buck DC/DC converter
• -40 to +105°C
• 7-mm × 7-mm RGZ VQFN48 (26 GPIOs)
• RoHS-compliant package